Messages

[IC1:]

Ok got it. Here you go. i got some weird numbers... (some reverse polarity and some microv numbers). I still cannot upload pics due to size of fuiles but if ok with you I may be able to email them to you. let me know.
IC1:
1: 4.21v
2: 4.22v
3: 3.35v
4: 1.1mv
5: 8.33v
6: 4.16v
7: 4.16v
8: 4.15v

IC2:
1: 4.27v
2: 4.00v
3: 3.99v
4: -7.60v
5: 14.05v
6: 3.95v
7: 4.01v
8: 3.99v

IC3:
1: 8.61v
2: 4.14v
3: 2.1mv
4: -3.61v
5: 8.00v
6: 5.96v
7: 3.44v
8: -7.64v
thanks!
m

Hey  jkokura, thanks for the reply. i know i screwed something up but i cannot find hte problem even after checking and rechecking over and over. maybe if you could get me a hint on where to look for the problem i can locate it. mods: i added a true bypass switch/wiring and i wired the led from the switch rather than using the board (could that be the problem? i cannot see it). here are the values i am getting on the ics using a battery (actualy measuring 8.36v):
ic1-1: 4.21v
ic1-8: 8.61v
ic2-1: 4.27v
ic2-8: 14.76v
ic3-1: 8.61v
ic3-8: 8.60v
i cannot upload pics due to file size. i'll try to reduce the resolution and upload them in a different post.
hope this helps. let me know if you have any hint. thanks!!!
m

Hi all,
New to this forum. I just finished building the sunking and I am having some issues. First of all, the tone control appears to do nothing. rolling the pot does not have any effect in the sound. i looked at the board over and over and measured all components and everything seems to be ok. i am lost here. any idea where the problem could be (the pot works fine).
the other thing I noticed is that when I kick the switch on, i takes a little time for the pedal to kick in (a little delay with no sound). I am wondering if the two problems are related. any idea?? help!!!
thanks!
m