Messages

If you can get jb weld or something similar you can patch those holes and repaint.


Sent from my iPhone using Tapatalk Pro

i I'll look for that type of glue

   Finally the dat has come, i think was a year of procastination but the Zero Point Deluxe Finally completed. Due to Quarentine in my country the post service its a mess so I had the need to recycle a box that had several holes from a past project.

What is your application, home or are you gigging regularly?

Gigs

   Hello guys can recomend me a good cable to run my guitar into my pedalboard and after to my amp.

thanks galaxiex i think your proposal is what i looking for.

  Hello Guys Anyone who can point me in the right direction about a schematic for a juction box, the guy on keyboards in my church need one for his two keys to use the same amp, not at the same time, but only change between the two keys

Thanks in advance

  hey jimilee you are right the pinout is different, Will change the ic and check if can here a difference

  Hello Guys im frustrating with my bloviator project, the main issue is that i got the same result in bypass mode and with the effect is engaged , i take several voltages with out the ic,s and the pot's at 12 o'clock. The version of the PCB is dated 06/01/11 the single side pcb.

Wall adapter voltage 9.48v

IC1

1. -0.01
2. -0.0
3. 0.01
4. 0
5. 0.02
6. 0.01
7. 0.01
8. 8.45


IC2

1. nothing
2. 0.01
3. 0.01
4. 8.45
5. 0.02
6. 0.01
7. 0.01
8. 0
9. 0
10. 0
11. 0
12. 0
13. 0
14. 0


IC3

1. 0
2. 0.01
3. 4.37
4. 0
5. 0
6. 0
7. 0
8. 0

After this read i add the ic3 for check the voltages in "vB" im using a TL072 instead the TL071 (This could be the problem?)


VB Voltage in al the points was 1.32 - 1.27

Someone can help me

Thanks in Advance

Yes, i need the signal unaffected, i found in the web a schematic to put a switch to change between the spliter signal bufeered and a signal unbuffered

Hello guys im buliding a 5 looper for a friend but i want to put a buffer splitter , one split goes to tuner and the other can be before the first loop or after the 5th loop. and this is the question before of after, please help me.

Thanks

Hello guys this is the trouble..... I'm building a six true bypass looper for a friend and he need a stereo loop at the sixth loop , anyone knows how to split the signal to the 2 switches, mantaining the true bypass without loss signal ? Thanks in advance for your help

Where can i buy a good pair of Pt2399 i have some troubles with tayda's ones, so much motorboat noise , and im frustrated with two builds thanks fot the help

thanks bret, im in the work already but when i have time i will post it.

   Hello i need some help with my Pasty face Build, i buy a set of three transistor at smallbear, so the set includes a  different layout  with different values, my question is which one is correct, which layout i need to use.?

  Hey jimlee you are super faster...