Messages

Oops nope I completely forgot the last IC tl072  Works perfect now, I even soldered a jumper to the missing leg of ne570 and it works perfect. I had to dial in a little cleaner signal through the bias knob by ear. Not in the instructions but worked. The repeats are nice, feel like they could be a touch cleaner with heavier plucks.

Huh I ripped a ne571 out of an old delay pedal, possible fried it. But got a delay signal and biased both BBD on pin3, only one delay though, then none of the rest of the bias instruction worked, no oscillation, no audible repeats when hooked up to break out box. The level and blend knobs fully functional. So u figured maybe try to rock the ne571 in the socket a little better since a little solder was on some legs, then broke a leg off!!!

So I am wondering does the compander control the feedback and repeats? I feel likes build is good, and I just need a new 570, thoughts?

Is this an acceptable sub? All I have on hand is a ne571...

BUMP BUELLER?

Wow great work!

that nauti-tron artwork is excellent!

Looks greart Midway, excellent artwork too!

Looks good man

Connect a 2k4 resistor (CLR) to the right side of R25, connect 2k4 to the round side of the LED, then connect flat side to ground.
Enjoy your phasing

Just put a mix pot on mine, WOW so useful. i also did a rate LED mod!

Did you ever get this mod done? 

I wish I were an industrial soldering robot.

Nah you dont mean that 

Nice build!

Wow some very cool stuff here!

Crazy