Messages

2134
2164
275
and a handful of others. (got to keep the bench happy)   

 

anybody ever build or attempt to build a tube delay ?

i was reading about the binson and couldnt help all the crazy thoughts

very interesting

http://tech.thetonegod.com/switches/switches.html

funny how you were going to just place a small $10 order and end up spending $175 ! just to much good stuff, scha-wing !
but hey.....you got to have those burr-browns     (along with all the other good stuff)

screw it, smallbear !

nope... dont like the way he lists caps !

mammoth !   

having trouble finding these ic's at mouser
JRC4558D
RC4558
OP275
TLC2202
TLC2272

ANY IDEAS ?

had a gig once years ago and damn near twisted my ankle on a pedal that popped lose. after that i hot glued a heavy cove around the base of the pedals as well as under them. worked like a champ and the glue had a odd effect with the lights

take a wood chopstick and tap the ics and listen as you go. hes right about burning your fingers, thats why i bend down and touch with my tongue (just kidding) if you have a decent dmm pull out the temp probe. still stuck ? poke around at other things with the ole chopstick. i used to have a old AC Memory man thing would shock you just for looking at it wrong !   

hey gang, i found a super cheap lead on voltage meters. i bought a handful
check it out, and its local !

http://www.ebay.com/sch/tovoto/m.html?item=200884025685&ssPageName=STRK%3AMEWNX%3AIT&rt=nc&_trksid=p2047675.l2562

Just never use a different guitar, and if you do, build another one. It's pretty simple I'd say.

just hot glue the guitar to your left hand and crotch and you will be good !   

if it was me id build a no-knober, but mount the board upside-down. drill micro holes in the bottom so you could bake adjustments from the underside with a small screwdriver through the holes.
back to the front side you got your footswitch, add another switch to change to another opamp
2 ops in one box ! slap a chiquita bannana sticker on it and call it good !

when doing a baby board with 1/4w i even get anal about what way i angle the lil bastards.
gold end to the board and all the soldiers lean the same way !

i use FCB Electronics on ebay for resistors leds and little things like that. its the same china crap only its wharehoused in the usa. i usually get my order in 5-7 days. never had a problem with the bastard and the product seems ok. check him out

nah....pedal power gets the duct tape or liquid nails