Messages

It says 6 string bass, is that the same as a baritone guitar?


Sent from my iPhone using Tapatalk

Nicely done sir, and so very neat.


Sent from my iPhone using Tapatalk

At some point the tips may not transfer heat evenly.


Sent from my iPhone using Tapatalk

After at least 100 builds, I still forget to do this. /derail


Sent from my iPhone using Tapatalk

Sorry for the lack of update. Went down with the flu on Saturday and it's been kicking my ass. I'll get them as soon as I feel up to it (starting to get a bit better).

No worries, I think I'm getting something now myself.


Sent from my iPhone using Tapatalk

If I touch R24 or R 25 on the right side, the effects each work, i'm stumped. You think that's the diodes too?

Do you have a cracked solder joint? I see you have dust covers on the pots but maybe they're shorting somewhere? I've no idea how poking a resistor would affect a circuit  Maybe something to do with that via between the two resistors.

It's grounding to me


Sent from my iPhone using Tapatalk

The 1n914 is where a lot of the signal rectification happens on the envelope follower and those are some of the ones used on IC3. I'll go back and double check my voltages to make sure my list is accurate.

As far as those particular diodes, I have seen the supposed 1n914 from Tayda cause problems with other builds (specifically the Rustbucket). So, it's hard to say if that's the issue or not (without testing of forward voltage, etc, I can't really say for sure)...no question that those are not 1n914, though. In general, I advise NOT buying diodes/ICs/transistors from Tayda. You just don't know what you are going to get.

Anyway, I will re-check my voltages and give an update soon.

If I touch R24 or R 25 on the right side, the effects each work, i'm stumped. You think that's the diodes too?

That's going to be part of the problem my guess. If you need some 1n914 I can send you a handful. I have thousands. But, not sure that's all that's going on.

Yes please. I am utterly confused as to what I have then. I can completely agree with you.


Sent from my iPhone using Tapatalk

Yeah those are definitely not 1n914. They are from Tayda, aren't they? Not shaming...just verifying

They are, now I have to make sure.


Sent from my iPhone using Tapatalk

Ampegulator? Not sure if that is the right name, but may want to check into that.

Ginger


Sent from my iPhone using Tapatalk

I'll look over it more carefully later today. What diodes are those?

1n914


Sent from my iPhone using Tapatalk

I have yeh and bow, but no wah and aehh
Which section did I screw up?



IC 3 Voltages are the only ones that are off
4.9
48
4.5
16.6
3.3
4.9
4.4
2.3
2.7
2.7
0
2.7
2.7
2.7
Sent from my iPhone using Tapatalk

jmkpcbs has a great one, guitarpcb has a great one and the one I use is the byoc bas overdrive.

Wow, that's beautiful.


Sent from my iPhone using Tapatalk

  I'm not saying more govt is ok, but the right to keep and bare arms was written when we only had muskets.


Sent from my iPhone using Tapatalk