Messages

There are minor cap differences, the second board has burn marks on it, I wonder what the pot values are or if they are different.

It looks like you have your DC input jack wired to the ground pad on the board and then you have your LED wired to the board +9v pad. That won't work. Everything should be wired identically on both boards, only difference being lug 8 of the first effect goes to lug 4 and 9 of the second effect.

Close up would be helpful


Sent from my iPhone using Tapatalk

Thanks for all the positivity guys, my brother loved it and even if he never uses it, it's a neat reminder of his trip.


Sent from my iPhone using Tapatalk

Without pics of the wiring, we're all pretty much dead in the water.


Sent from my iPhone using Tapatalk

The audio path should be in the BOM. That's a pretty straight forward circuit, make sure you calibrate it, that will stop you from getting sound.


Sent from my iPhone using Tapatalk

Yeah, that will be fine Til you get the right one. I doubt you'll hear any difference at all.


Sent from my iPhone using Tapatalk

Daaammmnnn that's really nice.


Sent from my iPhone using Tapatalk

For this type situation, I'd go with whatever you you like. I have an amp with a headphone jack, I've built a headphone amp with a 2 channel mixer both from tagboard. I have a Scarlett that unplug in to my computer.  Just whatever is easiest price wise, space wise and size wise.


Sent from my iPhone using Tapatalk

Shouldn't be an issue between those values.


Sent from my iPhone using Tapatalk

Cool, I'll give that a shot. For now I've put it aside. When I get frustrated, things melt.


Sent from my iPhone using Tapatalk

The cap that goes from the regulator to ground.


Sent from my iPhone using Tapatalk

Good point, I'll have to check what I got.


Sent from my iPhone using Tapatalk

The artwork is an actual photograph he took.


Sent from my iPhone using Tapatalk

I should elaborate a little, I'm working with the rust bucket.


Sent from my iPhone using Tapatalk