Messages

Kick Ass man!!!

They do have the power and ground in both sides, other than that, nothing stands out.

Mission accomplished. Nice.

Now I'm pretty darn sure of my components.

My Cave Dweller worked before I added the taptation, so I'm guessing it must be the taptation board.

The Cave Dweller layout has a 5.1k resistor coming from pin 6 of the PT2399, should I be connecting that resistor to where the taptation is supposed to go to pin 6?

i would put it in between pin 6 and the resistor, or directly to pin 6.

Victory never looked so good!

I like the mini ones on the osh park thread. 1776 are great especially for multis

Cool mod, looking forward to hearing the outcome!  I would open mine up and try it, but you know...im afraid to do that...

My toggle is easily accessed so it souls t be an issue, I just do t want to blow nothin up!

Ahh, vero is hit or miss. All your components are correct and correct placement? The resistors are easy to mess up, an r where a k should be and vice versa.

Me too, otherwise they're 1.99......each?

You're not kidding. I'd rather okay alone most of the time.

On it!

But can I measure capacitor values with my multimeter? My box caps aren't labeled.

Yes but not in the circuit. The usually have markings on the top. I'd just go by that. I'd start with the resistors first though.

I actually never tried that. But, one easy way to test it to see if it will work: flip it over to sample/hold mode then put a small resistor between lugs 1 and 3 of SW1B of the DPDT. I don't know the exact resistance to tell you, but I think you will need some rather than a jumper. Try 2k2 or 4k7.

I got ya. and then if it does work, a spdt on on toggle. I'll check it out. I'm not gonna fry anything am I? That would suck a bunch.

Next check all of your components and run a blade between the rows and check all your soldering. You should probably use a magnifying glass for that. I've been building for over two years now, and screwed up the soldering on a build last week.

Did you search the forum? It's been the topic of numerous threads. I can't tell you how to make it stop though, I'm sorry.

Simple really when you put it like that

Thanks

I had to learn it at some point also. Glad I could be of assistance, now build a kick ass delay.