Messages

I've got one built up, going to throw it in a box with a Green Bean.

Mines going into a cb-95 enclosure because the other 3 wahs I built aren't enough.

Anyone build one? Which trannies did you use?

Screwing down the knobs must have been a project in itself. I say leave it as it is man. Never open it again! Nicely done sir

Screwing don't the knobs must have been a project in itself. I say leave it as it is man. Never open it again! Nicely done sir

Daaaaaammmmnnnnn

Are you using the standard madbean wiring for your main 3pdt stomp? Ground goes from dc negative to input sleeve to lugs 2,3 and 6 of the main stomp. At that point you should be able to ground the secondary LED to the enclosure or input jack.

JIMI's BAAAACK!!!  Seriously, hope all is well on Planet J.

Killer build there, love to graphics and very tidy.  Now that you're not using batteries in the private stash you can ease the seat back and drop the 1776 and switch down to the bottom.  Gives you a way bigger palette to work your graphics mojo on.

"Dorothy", your red sparkle Phase 90, continues to get passed around like a Motley Crue groupie and a whole bunch of players around the Chicago suburbs sound way better for it.  Only rule is: 1) Don't bugger up the finish, and 2) You only get her for two weeks and it's back on my board.

Hey gordo, thanks! I was originally gonna put a battery in there and then A) I forgot to use a stereo jack and B) holy crap was it tight getting everything in there. I was gonna use a smaller stomp board, but at the last minute decided to go with the 1776 one because of the ease of wiring the LED. Interestingly enough, the stomp board and the LED were the last things I soldered. Made wiring up the board easier.
I'm really happy everyone is enjoying the phaser. Honestly that's one of the best sounding ones I've built to date. You need to start selling them to your buddies! You don't have to profit a lot, just enough to fund your own addiction.
Thanks for the kind words!!!

The DC jack or what ever the input jack is grounded to.

The red and black have continuity between them, but the black lug isn't connected to ground. I tested it on the enclosure as it is connectd to the jacks, that's okay isn't it?

As long as it makes it work properly, yes. I've done that before myself. The enclosure is grounded ultimately to the ground on the dc jack.

Man that's awesome. I have 2 succesful builds and 1 the in and outs are backwards, apparently they do things differently in Canadia. *cough cough grindcudtoms bazz fuss cough cough* 

Then it is most certainly a grounding issue.

Very nicely executed. I'd love to hear a demo if you have time.

Looks great, the etch matches the name!

I have no idea, but I will tell you that on the dc jacks we use, the ground is the center (B). Hook up a clr up to (A) and if you have a testing rig, use that to check it.

This is my tube screamer, there are many like it but this one is mine! I have built about 4 now, and sold them all. So I am keeping this one. The top and bottom are black and the sides are red with black bleed through.