Topics

Hi guys, I am thinking about to build guitar stand holder for 5-7 guitars. At the moment I have 4 guitars and one bass and occasionally I borrow guitar from friends.. Is there any measures or standard or even drawings for this.
Brane

Hi, starting from yesterday Show unread posts since last visit and Show new replies to your posts are gone. I am bit lost  Is this permanent?

Hi guys, I am in process of buying this vintage wah, so what do you think about it? It is actually wah/volume pedal and it is in very good condition.. Picture is of the actual pedal..
Few links..
http://www.tonehome.de/schaller-electronic/yoi-yoi-bow-wow/
http://www.effectsdatabase.com/model/schaller/whawha

Hi, this mine pharaoh build on Pickdropper's mini muff board. I started this I think over year ago and finally I finished it. I tested both option that I found on the internet, 47n and 470n caps in clipping caps position and in the signal and result was 470n sounded like real thing. I don't have 13mm knobs at moment but I'll order them in the next order from Paul. Here are few pics and also excell with pharaoh BOM.
https://www.dropbox.com/s/eoq4coxleskxv32/Mini%20Muff%20BOM%20for%20various%20types.xlsx?dl=0

Hi, I am preparing deadringer II finish and I wanted to put frequency range of body switch. In documents it says 720Hz to 120Hz. What are in between frequencies for 82n and 150n caps?

Brane

Hi guys, I am having problem with mine wah. Pot is noisey and scratchy but only when I move it faster. Already returned it back to seller, they said no problems they will send new one and in the end they send the same pot. Could something else be problem except potentiometer?
Brane

Hi guys, I don't remember I ever post 1590a build... So be gentle This is mine 4th phase 90 build and it is mine favourite. It is build on the pickdropper's board and it sounds really great. I've used bunch of different caps types (also burned one), fets were matched with +/- 0,01 V and I also used Thomas 1590a 3pdt pcb. Enclosure was etched with HCl and H2O2 and as you can see it is simple design.
Few pics and that's it
Cheers
Brane

Hi guys, I have Maxon SD-9 shell and I need your help. I can't decide what to put inside    Maybe aion meteor? All ideas are welcome..

Hi guys, I've been building another Univibe and I have problems with the clean signal, it is distorting with stronger strucks. I've used taydas multilayer ceramics for caps. Could that be a reason?

Brane

Hi everyone, I am experiencing  problems with Paypal. Yesterday I wanted to pay something and I found that mine credit card is not connected to paypal account any more and I can't reconnect it. I've been using this card since I have Paypal account, that is for about 4-5 years. I've send them mail and waiting for response.
Anyone with same or similar experience?

Hi guys I am building sunking 2 and deadringer 2 and both of them have BS250 transistor. I bought only two of BS250 and I don't want to burn them, so how can I check pinout of them with a multimeter?
Thanks
Brane

Hi, I am looking for deluxe electric mistress artwork. Anyone?

Hi, is there anyone ho has Tonepad Maestro FSH rev2 pdf? On the tonepad site there is only rev1..

Brane

Hi, I am refreshing mine ibanez jpm100 with a new pickups,pots and switch. I both two dimarzios, crunch lab and liquie fire and I want treble bleed mod. Dimarzio recommends to put 560pF cap and 300k resistor on to hot legs of volume pot.
Is this resistor needed? Is there big difference between these two option, with and without resistor?
Thanks
Brane

Hi everyone, I just got HP deskjet 1510. I've tried to make few pcbs, but when I iron the pcb transfer is not staying on pcb.
Is there anyone using this type of printer? Tips? I would be grateful
Brane

Hi everyone, I recently bought Icar wah pot and installed it and it is noisy and scratchy. So I decide to return it to Musikding and they offer me me new one.
My fear is that I could get another one with same issues, so I was thinking of taking Hot Potz II.
What do you think? Is there anyone with same experience as me?

Brane

Hi, here is wah I've finish few days ago and I am really satisfied with it. I decide to do all possible mods that cross my mind. It has 2 inductor (Eleca Halo & Vox v847a) so in pos 1 is Eleca, in pos 2 Vox and pos 3 both in series which gives massive fat wah,also  selectable caps with 4n7,10n and 22n to choose from. Instead of fixed Q resistor I've put 100k pot. I've also added toggle, so you can choose beetwen 39k and 68k in R2. There is also a switch that flips in and out of wah so you can get those David Gilmour whale sounds. For on/off function I am using takamisawa relay (for wah and boost).For the boost I've put external pot. All resistors are carbon comp, caps are nichicon and panasonics and transistors are 2sc828. Pot knobs are just for first hand, painting was combination of black and red, it seems it ended brown (that is not what I wanted)
Here are few photos

Is there anything similar to this pedal allready ready to build?

Hi guys, I started to trace today a pedal and it really needs lot of concentration. Do you have any tips, so it would be easier
Cheers
Brane

Hi guys,I wanted to do univibe in wah for long time and did some research and found UVICS by R.G.  I've started this project 6 months ago and I finally finished it yesterday. I did few mods like independent led blinking, Madbeans Vintage-Modern input, selectable caps for different voicing of the vibe and trimmable speed adjustment of the rocker gain.  This was mine first swirl painting with marble paints, so it's ok but not perfect. I decide not to clearcoat it, so it will get that old look with some time.
Here are few photos..