News:

Forum may be experiencing issues.

Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - Govmnt_Lacky

#1
Global Annoucements / Re: Forum issues
April 11, 2024, 10:49:45 AM
Quote from: brucer on April 11, 2024, 03:08:11 AM
Quote from: midwayfair on April 11, 2024, 01:25:50 AMYay!

Also: mother of god where's the dark mode option?

Click on username in upper left of top bar, select Look and Layout, click "CHANGE" next to Current Theme\Forum or Board Default, scroll down to "Dark Caramel", select "USE THIS THEME"

Just tried this. When you hit the "Change" button, it will change to Dark Caramel. However, when you hit the "Home" button... it reverts back to the original theme. If you go back and try to change it again... TOKEN ERROR  >:(
#2
Global Annoucements / Re: Forum issues
April 10, 2024, 10:54:32 AM
Still randomly showing as logged in and then when moving to a thread or back to main page it shows as logged out.
Also, posts on threads do not show up after posting. They take a bit of time to show.

EDIT: Also, forum time is screwed up. Even when I can select a time zone to get it to show as correct, as soon as I change pages it reverts back to the wrong time. If you change the time zone too many times you get a "token error" and it is still screwed up.
#3
Global Annoucements / Re: Forum issues
April 09, 2024, 03:31:49 PM
Time zones NOT working under Forum Profile. Tried to set it to EST but it is still 1 hour too slow (its really 11AM EST and forum shows 10AM) and when I try to go back further... I get a token error  :-\
#4
Global Annoucements / Re: Forum issues
April 09, 2024, 10:47:39 AM
Only thing I noticed is that when I first pulled up the page I tried to log in. When I did, it did NOT show that I was logged in. I had to actually open this thread to see that I was properly logged in. Weird!

Also... no avatar. Need to upload again??
#5
Open Discussion / Re: NGD
February 12, 2024, 06:33:14 PM
At one point, I had a '74 Goldtop Factory "Second." Still miss it  :'(
#6
Open Discussion / Re: Gold Anniversary Big Muff
January 31, 2024, 03:39:35 PM
Quote from: LaceSensor on January 23, 2024, 10:40:42 PM
Waiting for $1000 on Reverb lolz to commence

Anywhere from $650 to $1200  ::)
#7
VFE Projects / Re: What do I need to burn VFE PICs?
January 18, 2024, 03:37:01 PM
Quote from: jessenator on January 18, 2024, 01:25:35 PM
I bought this for another project, but I'm intending on using it for PICs. People in the vintage computing world find it invaluable for programming other chip types, which is why I bought it (RIP that project). However it might be a tad overkill for just doing PICs. I'll be curious what Bean and other experienced folks have to say.

TL866II
https://www.jameco.com/z/TL866II-Plus-Jameco-Valuepro-USB-High-Performance-Programmer_2297823.html

I'm happy to lend/send it your way if you want. I'm not messing with relay bypass atm. Runs on windows, but not sure about 11—still have 10, because I disabled virtual TPM in BIOS :P

I have been using one of these (or one just like it) for years BUT, only to program EEPROMS. I use a PICKIT 2 Programmer for PIC chips. Honestly, not sure if PICs can be programmed with the TL866  :-\
#8
Looks fine to me. If the pedal is working properly, the voltage differences could be attributed to differences in part tolerances, difference in voltage, etc. We are talking less than 1/2 of a volt  :)

Rock on!
#9
Open Discussion / Re: Is the PM system broken??
January 08, 2024, 04:59:15 PM
Quote from: jessenator on January 08, 2024, 03:00:15 PM
I got 6 from you, if that counts as working  ;D

Weird! I would type out the message, hit send, and NOTHING. Tried Preview too and noting.

Oh well... at least you got it.  8)
#10
Open Discussion / Is the PM system broken??
January 08, 2024, 01:17:35 PM
Can't seem to send PMs to anyone. Is there an issue?
#11
Quote from: brooks78 on November 29, 2023, 03:35:13 PM
I have to keep the TAILS switch on, otherwise I get no effect at all. I'm not sure why that is happening, but I'm happy enough with how it is working and don't want to "poke the bear" by messing with the effect too much because of how much effort it took to get it working in the first place.

Is the Tails LED functioning properly? If so, use your multimeter to measure the poles on the 3PDT that control the Tails switching. Make sure they are functioning properly.
#12
Quote from: brooks78 on November 23, 2023, 07:14:50 PM
For some reason, the delay won't work if the Tails switch isn't engaged (any thoughts on that are welcome), but it's nothing that I'm too concerned about to figure out why.

Just a quick thought but, are you certain you used the correct switch type? Is it supposed to be a Normally OPEN momentary and you used a Normally CLOSED switch? OR vice/versa?? Or used a momentary switch when you need a latching switch??
#13
Open Discussion / Re: JHS relaunches Ross pedals
August 21, 2023, 05:45:34 PM
"... after YEARS of development..."

Huh??
#14
Open Discussion / Re: Returning to the fold…
July 27, 2023, 10:39:11 AM
Welcome back Mike! Place wasn't the same without you  ;D

I've been slowing down myself with regards to building so, if you ever need anything... just gimme a shout!
#15
Open Discussion / Re: NOW I remember....
July 27, 2023, 10:36:56 AM
Quote from: Aentons on July 26, 2023, 05:32:30 PM
What he's saying is that you eagerly wait to click the button till the last second with  your max bid entered in the box. Thats how I've always done it. You have to enter what you are willing to pay. You won't get a second chance.

Ahhh... Got it now!

Do a lot of people really do that? If you know your maximum bid, why wait until the very last second to enter it?  ??? Why not just place a bid with your max and be done with it (like I do)? Weird!