1590a sized harmonic percolator pcb anyone?

[adam_bz]

Anyone got one?

[Bret608]

Jon Patton's (midwayfair's) perf layout worked in a 1590a if I remember correctly (look for his Cappuccino Fuzz build report). You could get that etched by Haberdasher on copper clad if you don't do perfboard.

[pickdropper]

I've thought about it but haven't done it yet.  One of these years.

[Stomptown]

I'm almost certain I have a 1590a layout in my eagle files at home.  I will check and if I find it I can share the project on Oshpark and you could order a set of PCBs. Only caveat is I won't be home to check until Wednesday evening.  I will keep you posted.

[Addy Bart]

I'm almost certain I have a 1590a layout in my eagle files at home.  I will check and if I find it I can share the project on Oshpark and you could order a set of PCBs. Only caveat is I won't be home to check until Wednesday evening.  I will keep you posted.

Sweet. I'm up for building one of these too. 

[somnif]

As noted above, this perf layout will fit a 1590A (with the usual wiring ninja voodoo nonsense these tiny enclosures require).

Credit to Jon Patton

[midwayfair]

I could have sworn I made an etchable version of that layout. Maybe for haveyouseenhim ... who I haven't seen around for a quite while.

[davent]

I could have sworn I made an etchable version of that layout. Maybe for haveyouseenhim ... who I haven't seen around for a quite while.

I think Mike's (haveyouseenhim) switched his attention to shooting lead rather then melting it.

dave

[Stomptown]

I found this in my eagle files and shared it through Oshpark.  I added a link to the schematic which lists the stock values. Enjoy!

https://oshpark.com/shared_projects/WsWUOAej

[Addy Bart]

Brilliant! Thanks for this :-)