News:

Forum may be experiencing issues.

Main Menu

Tillman buffer in a cable

Started by jubal81, March 08, 2012, 10:43:42 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

jubal81

March 08, 2012, 10:43:42 PM
I'm going to build one of these phantom-powered JFET buffer cables.
http://www.till.com/articles/PreampCable/index.html

He says in the article that, in the future, he's run it at a higher voltage to get more headroom for humbuckers/high-gain pickups. The voltage part is easy (I have a few road rage boards). If I regulate to 15V, what value resistors should I use?
"If you put all the knobs on your amplifier on 10 you can get a much higher reaction-to-effort ratio with an electric guitar than you can with an acoustic."
- David Fair
Print
Go Up Pages1
User actions