I need an etchable centaur layout

[haveyouseenhim]

I did a bit of searching, but I could only find one or two etch able layouts and there was no build docs/wiring diagrams.

Can anyone point me in the right direction?

[jimilee]

The Kingslayer overdrive is a highly modified version of the Klon® Centaur™

[haveyouseenhim]

I know. I was hoping for a plain ole klon.

Klon® Centaur™

[Stomptown]

Here is the Madbean Sunking build doc with etchable layout included!

http://www.madbeanpedals.com/projects/Sunking/docs/Sunking_ver.3.pdf

[selfdestroyer]

I know. I was hoping for a plain ole klon.

Klon® Centaur™

You can give Bajaman's layout a try
https://drive.google.com/file/d/0B7EnzxavIi5_dnhrOHdvd2NWSzg/edit?usp=sharing

Cody

[haveyouseenhim]

Here is the Madbean Sunking build doc with etchable layout included!

Awesome. That's the one I had in mind. I just couldn't remember what it was called and where to get it.

You can give Bajaman's layout a try

Thanks bud. I already have the sunking in the etchant.

[Gledison]

Here is the Madbean Sunking build doc with etchable layout included!

Awesome. That's the one I had in mind. I just couldn't remember what it was called and where to get it.

You can give Bajaman's layout a try

Thanks bud. I already have the sunking in the etchant.

Hey mate.
I have just adjusted a bit the etching layout of the sunking. It was a bit shifted in the middle. Dont know if its a big deal or not, but just in case if u want i have a repaired one.

[haveyouseenhim]

Hey mate.
I have just adjusted a bit the etching layout of the sunking. It was a bit shifted in the middle. Dont know if its a big deal or not, but just in case if u want i have a repaired one.

Cool thanks. I tried fixing it in ms paint but it just shifted it the other direction.  One of the boards goofed up in the etchant so it would be awesome of you to share the corrected version.

[Gledison]

Hey mate.
I have just adjusted a bit the etching layout of the sunking. It was a bit shifted in the middle. Dont know if its a big deal or not, but just in case if u want i have a repaired one.

Cool thanks. I tried fixing it in ms paint but it just shifted it the other direction.  One of the boards goofed up in the etchant so it would be awesome of you to share the corrected version.

No prob, but have to send u tomorrow ok? Its in my office computer

[Govmnt_Lacky]

Hey mate.
I have just adjusted a bit the etching layout of the sunking. It was a bit shifted in the middle. Dont know if its a big deal or not, but just in case if u want i have a repaired one.

Cool thanks. I tried fixing it in ms paint but it just shifted it the other direction.  One of the boards goofed up in the etchant so it would be awesome of you to share the corrected version.

Uhhh... What was wrong with the layout that Jon posted? 

[Gledison]

When i print the pdf file the etching layout shift a little bit! As my etchings are always not 100 % perfect, better to start with a perfect one! It just that sone of the tracks are not straight.

[haveyouseenhim]

Uhhh... What was wrong with the layout that Jon posted? 

About halfway down the whole thing shifts to the side by one or two pixels. It's usable. Just kinda goofy looking.

[selfdestroyer]

Uhhh... What was wrong with the layout that Jon posted? 

About halfway down the whole thing shifts to the side by one or two pixels. It's usable. Just kinda goofy looking.

I guess I never noticed it with the Sunking V3 since I usually import the PDFs in Photoshop to clean up a bit before I print.

Cody

[Gledison]

Uhhh... What was wrong with the layout that Jon posted? 

About halfway down the whole thing shifts to the side by one or two pixels. It's usable. Just kinda goofy looking.

Here we go...bloody perfectinists

[haveyouseenhim]

Here we go...bloody perfectinists

Awesome, thanks.