Author Topic: Quasar Drive (Would like a bit more)  (Read 1616 times)

sjturbo

  • Diode Destroyer
  • *
  • Posts: 9
    • View Profile
Quasar Drive (Would like a bit more)
« on: May 25, 2010, 01:30:59 AM »
Need some help please. I built the Quasar stock and I love the clarity and the way it does not change my tone. Here is my problem. With the drive maxed I can pick lightly and get good clean drive and dig in and get good smooth breakup but I would like to not have to dig in quite so hard to get it. Am I asking the impossible? I do not want to change anything else about the pedal. Any suggestions?

mjcyates

  • Electron Doctor
  • *****
  • Posts: 950
    • View Profile
Re: Quasar Drive (Would like a bit more)
« Reply #1 on: May 25, 2010, 06:25:12 AM »
I know in some circuits changing the value of the drive/gain pot will do what you are asking. Not sure how this circuit would react to that. It would be an easy enough experiment to try a 500k or 1meg gain pot.

madbean

  • Administrator
  • Electron Doctor
  • *****
  • Posts: 9663
  • Brian
    • View Profile
    • madbeanpedals
Re: Quasar Drive (Would like a bit more)
« Reply #2 on: May 25, 2010, 09:41:42 AM »
Yes, try a 500kB for the drive pot. You could try jumpering out D3 and D4, too. This would help balance out the increased gain from the drive pot, and preserve the dynamics a bit more.
Things are fine, actually.