News:

Forum may be experiencing issues.

Main Menu

Darkside.. Help! 1N5401 problem

Started by sdlogan9, July 05, 2014, 07:37:51 PM

Previous topic - Next topic

sdlogan9

So I ordered 1N5401's from Mouser here..  This is the exact ones I got.

The problem is..  they are HUGE!

Did I get the right ones>?

Problem is that they will not fit in my etch.  The leads are way to fat to fit in the holes... even if I drill the holes larger it will be larger than the traces that its supposed to thread through.

http://www.mouser.com/ProductDetail/Fairchild-Semiconductor/1N5401/?qs=sGAEpiMZZMutXGli8Ay4kCkC1e4xYYaOYjcYMdrnZ0Y%3d


Haberdasher

the pcb is probably laid out for something in a DO-41 pkg right there.

just substitute 1n4001.  i think it should work fine.
Looking for a discontinued madbean board?  Check out my THREAD

FABBED PCB's FOR SALE:
Now carrying Matched JFETS

jubal81

#2
Use Bat46 if you got 'em.

Reverse polarity? 1n4001. Sorry, I spoke too soon.
"If you put all the knobs on your amplifier on 10 you can get a much higher reaction-to-effort ratio with an electric guitar than you can with an acoustic."
- David Fair

Mike B.

Isn't the 1N5401 in the Darkside circuit used for reverse polarity protection? I wouldnt think a shottky diode would be ideal in that application - too much reverse current leakage.

jimilee


Quote from: Haberdasher on July 05, 2014, 09:01:58 PM
the pcb is probably laid out for something in a DO-41 pkg right there.

just substitute 1n4001.  i think it should work fine.
This
Pedal building is like the opposite of sex.  All the fun stuff happens before you get in the box.

selfdestroyer

QuoteSo I ordered 1N5401's from Mouser here..  This is the exact ones I got.

The problem is..  they are HUGE!

Just happened to me tonight.. Did a quick search for a 5401 replacement and BAM! found this thread. Just thought I would send it to the top since Black Horse Effects is selling the Duplex Drive again.

Cody