News:

Forum may be experiencing issues.

Main Menu

Anyone know why my Sunking II board keeps blowin' up?

Started by upthepunxxx, September 02, 2014, 06:42:36 PM

Previous topic - Next topic

murdog47

Jumpered R32 problem solved. Voltages all look good. Not sure what the issue is/was. Sounds good now  :)

upthepunxxx

Awesome! Yea man sorry i didn't get back to you, it got a little crazy at work this week. Stoked you got the board back up and running. Sounds like you did the same thing I did  ;D


Quote from: murdog47 on October 01, 2014, 11:23:20 AM
Jumpered R32 problem solved. Voltages all look good. Not sure what the issue is/was. Sounds good now  :)
Wake up and smell the noise!!

murdog47

Still not sure with the voltages I'm reading why the heck R32 would be burning up like that. And why I haven't seen more people having the same issue. Must be a gremlin in there somewhere. A Klon curse if you will  ;D



mgwhit

The current version of the Sunking 2 schematic shows that 10R resistor as 1/2W.  Were you using a 1/4W resistor?

upthepunxxx

I was using a 1/2 watt'r

Quote from: mgwhit on October 02, 2014, 12:56:43 AM
The current version of the Sunking 2 schematic shows that 10R resistor as 1/2W.  Were you using a 1/4W resistor?
Wake up and smell the noise!!

murdog47

Quote from: mgwhit on October 02, 2014, 12:56:43 AM
The current version of the Sunking 2 schematic shows that 10R resistor as 1/2W.  Were you using a 1/4W resistor?

Nope 1/2W

mgwhit


upthepunxxx

Wake up and smell the noise!!

blearyeyes

I say we get some Chinese Concrete Resistors and give it a go!