News:

Forum may be experiencing issues.

Main Menu

Grapevine Cap Questions

Started by PhiloB, November 15, 2014, 03:59:12 AM

Previous topic - Next topic

PhiloB

I just etched a v2 grapevine board.  Thought I had all the parts but realized that instead of 50n I have 47n.  Instead of 3n, I have 3n3.  Is this an issue?  Will there be a audible difference?  Or is it a matter of parts used in the original circuit?


Sent from my iPhone using Tapatalk

jubal81

"If you put all the knobs on your amplifier on 10 you can get a much higher reaction-to-effort ratio with an electric guitar than you can with an acoustic."
- David Fair

lincolnic

I built mine with those same substitutions and I think it sounds great. Keep in mind that with the varying specs of most caps, there's a chance your 50n cap could measure 47n anyway. Build it up, it'll be fine.

PhiloB

Thanks guys!  Drilled the PCB tonight.  Hope to have it populated in the next couple of days.


Sent from my iPhone using Tapatalk