News:

Forum may be experiencing issues.

Main Menu

Pedalboard pics megathread

Started by madbean, December 19, 2014, 03:16:25 PM

Previous topic - Next topic

playpunk

"my legend grows" - playpunk

Jabulani Jonny

#31
My latest:

Starting from Bottom Right to VP Jr:  Bearhug->Kraken->Cerulean (BBOD) ->Klone -> BYOC OD2 ->Cosmo -> VP Jr -> EHX Pulsar -> Ibanez CS9 -> Multiplex Jr ->Tenebrion -> TC Electronics Nova Delay

Tuner is from tuner out of VP Jr.  I try to keep a little extra room on the board for when I have pedals I want to try out.  The Pulsar is soon to be replaced by Drolo's Twin Peaks Tremolo.  Can't wait for that one.

I'm also looking at a 2-in-1 with Jon's Clipper Ship into a Kingslayer.  Kind of thinking that would be a sweet 2 in 1. 

Jonathan


GrindCustoms

What it is so far.. as stuff have started to move less around... well.. trying to...



And it goes....

Guitar Input(Multi) - TunerOut/Mute (in parrallel with audio path) - RottenKomp(Modded LoveSqueeze/Multi) - Send to EHX Pitchfork - Modded Mutron MicroV Filter(Blue) - Return to Klone(Multi) - TubeScreamer(Multi) - Send to Function FX ClusterFuzz - TSM680 MKII (BMP that kills them all) - Return to Decimator(Multi) - Multi Output to Machette (UglyFace/LFO - 5knobber/2Footswitch Grinded) - Maestro PSA1 Phaser(3Footswitch/knobless) - Ibanez FL9 Flanger MIJ - Ibanez AD9 Delay MIJ - RubADubDeluxe Reverb - Ditto Looper - Amp Input!
Killing Unicorns, day after day...

Building a better world brick by brick:https://rebrickable.com/users/GrindingBricks/mocs/

micromegas

Quote from: GrindCustoms on February 21, 2015, 03:48:15 PM
What it is so far.. as stuff have started to move less around... well.. trying to...



And it goes....

Guitar Input(Multi) - TunerOut/Mute (in parrallel with audio path) - RottenKomp(Modded LoveSqueeze/Multi) - Send to EHX Pitchfork - Modded Mutron MicroV Filter(Blue) - Return to Klone(Multi) - TubeScreamer(Multi) - Send to Function FX ClusterFuzz - TSM680 MKII (BMP that kills them all) - Return to Decimator(Multi) - Multi Output to Machette (UglyFace/LFO - 5knobber/2Footswitch Grinded) - Maestro PSA1 Phaser(3Footswitch/knobless) - Ibanez FL9 Flanger MIJ - Ibanez AD9 Delay MIJ - RubADubDeluxe Reverb - Ditto Looper - Amp Input!
I said it on facebook and will repeat it here: demo!! This thing has to sound epic
'My favorite programming language is solder' - Bob Pease

Software Developer @ bela.io

GrindCustoms

Thanks Adan! If changing the Gain - Push/Pull potentiometer in my MarkIV does'nt turn out being a nightmare... i'd probably be able to wrap a crap clip together... As i need a high gain amp to demonstrate entirely how i'm using that setup.

Rej
Killing Unicorns, day after day...

Building a better world brick by brick:https://rebrickable.com/users/GrindingBricks/mocs/

micromegas

Quote from: GrindCustoms on February 22, 2015, 01:10:29 PM
Thanks Adan! If changing the Gain - Push/Pull potentiometer in my MarkIV does'nt turn out being a nightmare... i'd probably be able to wrap a crap clip together... As i need a high gain amp to demonstrate entirely how i'm using that setup.

Rej
I have a similar problem with a push/pull potentiometer in my old Mark III. It changes from channel1 to channel2 whenever it feels to (like right in the middle of a recording or so)
'My favorite programming language is solder' - Bob Pease

Software Developer @ bela.io

GrindCustoms

Quote from: micromegas on February 22, 2015, 01:18:38 PM
Quote from: GrindCustoms on February 22, 2015, 01:10:29 PM
Thanks Adan! If changing the Gain - Push/Pull potentiometer in my MarkIV does'nt turn out being a nightmare... i'd probably be able to wrap a crap clip together... As i need a high gain amp to demonstrate entirely how i'm using that setup.

Rej
I have a similar problem with a push/pull potentiometer in my old Mark III. It changes from channel1 to channel2 whenever it feels to (like right in the middle of a recording or so)

Send Mesa an email with your amp serial number and they'll get you the right pot, mine is a first draft production unit and they sent me the pot used back in those days because i wanted to keep the integrity of the amp as much as possible. Very comprehensive people, though... they'll try to sell you a MarkV or Mark25... word! hehe
Killing Unicorns, day after day...

Building a better world brick by brick:https://rebrickable.com/users/GrindingBricks/mocs/

mmlee

Nowhere near as fancy as any of your pedalboards but here is my humble little board I just threw together in just under an hour out of an old plank of wood I found in the basement.



It goes from right to left:
Tuner, demo tape fuzz, GCFX Catch 22, Stomptown Pennyroyal Chorus, Line 6 Echo Park

The demo tape fuzz is my own layout with optical bypass on the PCB, I'll do a build a report at some point.

The board is for a gig tonight, I've been engineering for my friends band and he needs a guitarist for tonight.  Its going to be my first gig in a year, I best get learning the songs. Wish me luck!

Cheers,
Marcus
>Marcus

Cortexturizer

nice to see even more guys rocking their own layouts and little diy wonders, great board
https://kuatodesign.blogspot.com - thoughts on some pedals I made
https://soundcloud.com/kuato-design-stompboxes - sounds and jams

Tremster

#40
(Board has changed a lot, so removed pictures here)

storyboardist

Here's the current incarnation of my board.



Ernie Ball Volume Jr. > Boss TU-2 (tuner out)
                               > Voodoo Labs Sparkle Drive > MXR '78 Custom Badass Distortion > Tonebender Mk. II Professional clone > Danelectro Cool Cat Tremolo > Vox Repeat Percussion clone > MXR Carbon Copy > Boss PS-5 Super Shifter
Guy behind Effects Layouts

raccoondad

#42
My humble gigging board.



It sounds like this (my band): https://ocelotalot.bandcamp.com

Top left (white/black) is a Devi Ever Hyperion I built with a switchable Green Ringer octave and Voltage Sag knob.

Top right (ghost) is a Rat with switchable Gain knobs I built using Madbean's Runt board

Middle (bare with red sharpie) is a combination Delay/Reverb I built with Grindcustom's Tenebrion Reverb  and Madbean's Zero Point Micro II boards.

Dminner

#43
Thanks to all you guys that helped make it happen.  All pedals were built in collaboration with madbean members :) (aside from the volume pedal).

So close to finishing. Almost wired up but ran out of patch cables...






lrgaraujo

Quote from: Dminner on May 05, 2015, 12:23:13 AM
Thanks to all you guys that helped make it happen.  All pedals were built in collaboration with madbean members :) (aside from the volume pedal).

So close to finishing. Almost wired up but ran out of patch cables for the volume pedal.

My goodness, that's amazing!