Author Topic: Pork Barrel Build Complete  (Read 3988 times)

carbonfreeze

  • Diode Destroyer
  • *
  • Posts: 14
    • View Profile
Pork Barrel Build Complete
« on: June 16, 2010, 10:23:13 PM »
I finally finished this Chorus pedal. It was my most complicated build so far, or at least tied with my Dr. Boogie. This may be tougher because of the board size and the switches, which I've never done before. So that was neat.

I love the sound. It came out great, and it sounds better than my CE-2 ever did. Although I can't find my CE-2 anywhere, I suspect I've lost it in a move somewhere, and it's gone for good. No matter though, cause this one is much more versatile.

This was also my first attempt at using rub on letters. It's fine for simple labeling, but overall, I'll try to use another method in the future. In fact, I'm not going to clear coat over this, as the letters wear off, I'll label it with a decal and then clear it. One day.



pauloman80

  • Stompbox Star
  • ***
  • Posts: 192
    • View Profile
Re: Pork Barrel Build Complete
« Reply #1 on: June 17, 2010, 10:43:45 AM »
That looks killer, man.  Really nice job!  Love the powder blue with the white chicken head knobs!  Got pics of the guts?  I'd enjoy seeing how the insides turned out.
--------------------------------------------------
Regards,
pauloman80

Haberdasher

  • Electron Doctor
  • *****
  • Posts: 2844
  • "El Duder-ino"
    • View Profile
Re: Pork Barrel Build Complete
« Reply #2 on: June 17, 2010, 11:20:27 AM »
Looks very cool.

Another vote for a gut-shot!
Looking for a discontinued madbean board?  Check out my THREAD

FABRICATED PCB's FOR SALE:

CRBMoA

  • Solder Ninja
  • ****
  • Posts: 317
  • Chris Bloniarz ....... WILBUR ENTERPRISES
    • View Profile
Re: Pork Barrel Build Complete
« Reply #3 on: June 17, 2010, 05:55:31 PM »
Looks very cool.

Another vote for a gut-shot!

And yet another!

carbonfreeze

  • Diode Destroyer
  • *
  • Posts: 14
    • View Profile
Re: Pork Barrel Build Complete
« Reply #4 on: June 18, 2010, 01:56:51 PM »
here's a couple  :)





not my best wiring job. The 3pdt wore me out on this one for some reason.

pietronet

  • Diode Destroyer
  • *
  • Posts: 1
    • View Profile
Re: Pork Barrel Build Complete
« Reply #5 on: November 25, 2010, 06:12:33 AM »
Hi,

I have just finished the same pedal, do you have some distortion when you attack the strings hard?
Thx
Pierre.

eniacmike

  • Solder Ninja
  • ****
  • Posts: 372
  • Mike
    • View Profile
Re: Pork Barrel Build Complete
« Reply #6 on: November 25, 2010, 07:37:28 AM »
I tried rub on letters too and it is alot of work. I do like the look of your pedal though, especially the white letters because as long as I am printing my decals with a b/w lazer printer they will always be BLACK.

I don't hear any distortion from mine but maybe it is because I use low output pickups, did you try adjusting the trimpot?

carbonfreeze

  • Diode Destroyer
  • *
  • Posts: 14
    • View Profile
Re: Pork Barrel Build Complete
« Reply #7 on: January 11, 2011, 12:57:29 AM »
Sorry I took so long to reply. I haven't been building for the past several months. But a friend is working on one of these and I made a video demo for him. Check it out. My amp is a little gainy, but no, I haven't noticed any distortion from pick attack. I think eniacmike has a good idea about the trim pot.

Here's the video demo.

http://www.youtube.com/watch?v=qnWcsXoLdLs

princeton

  • Diode Destroyer
  • *
  • Posts: 25
    • View Profile
Re: Pork Barrel Build Complete
« Reply #8 on: January 11, 2011, 02:33:33 PM »
Sorry I took so long to reply. I haven't been building for the past several months. But a friend is working on one of these and I made a video demo for him. Check it out. My amp is a little gainy, but no, I haven't noticed any distortion from pick attack. I think eniacmike has a good idea about the trim pot.

Here's the video demo.

http://www.youtube.com/watch?v=qnWcsXoLdLs

Nice one, sounds so Purple Rain-y. Very useful video. Thx

rowland1

  • Transistor Tickler
  • **
  • Posts: 82
  • Rowland
    • View Profile
Re: Pork Barrel Build Complete
« Reply #9 on: January 11, 2011, 03:51:47 PM »
Thanks for the youtube demo. I am gonna have to build one of these. BTW, what is that "curiously strong" little pedal you've got on your board?

carbonfreeze

  • Diode Destroyer
  • *
  • Posts: 14
    • View Profile
Re: Pork Barrel Build Complete
« Reply #10 on: January 11, 2011, 11:13:22 PM »
It took me a minute to figure out which one you were talking about, that's funny. The Altoids tin is a tap tempo for my DD7 delay. People love it and think I'm some kind of electronics wiz. And I love popping it open and showing the it's just 2 wires connected to a switch.

I really need to learn some Rush tunes and maybe some Police and Duran Duran to do a proper demo of the Pork Barrell.

rowland1

  • Transistor Tickler
  • **
  • Posts: 82
  • Rowland
    • View Profile
Re: Pork Barrel Build Complete
« Reply #11 on: January 12, 2011, 09:07:49 AM »
Using the Altoids tin is a cool idea. I'll have to see what I can squeeze into one of those.

Its funny you mention Rush - I always end up playing 'No One at the Bridge' from Caress of Steel when I try a new chorus pedal. Perfect for extreme swirly chorus.

Thanks again for your posts and reply. - Rowland