Aristocrat Caps (C9 & C20)

[Jargo]

 I asked about this in another thread...
  I have a couple of Metal Film Caps left over from something else. Can I use these huge yellow monsters (105k) in the C9 & C20 locations??? I plan on breadboarding them later to find out, but figured I asked first.

Thanks all,

Jargo


It looks like one of these



[attachment deleted by admin]

[bigmufffuzzwizz]

If you can get them to fit in there, they should work just fine! 

[Jargo]

I thought about perhaps from behind the board, and bent as to remain flush with the PCB. We'll see...Thanks so much!!

[bigmufffuzzwizz]

You could solder them to a piece of vero/perfboard and just run wires to the pads where they should be.

[Jargo]

Like this! next time, hopefully sound samples...!

[attachment deleted by admin]