Author Topic: Req. mod and double delay board for Aquaboy  (Read 1583 times)

andersom

  • Diode Destroyer
  • *
  • Posts: 16
    • View Profile
Req. mod and double delay board for Aquaboy
« on: July 31, 2011, 04:03:53 AM »
Hi all,

I'm building the Aquaboy from Madbean so far so good.
but i want to incorporate the mod and double delay board.
I have the boards but the link wich is profided in the pdf is not working anymore.

Is there somebody who has a copy of project details with the photo's?

Thanks in advance

Andreas

gtr2

  • Electron Doctor
  • *****
  • Posts: 4788
  • Josh
    • View Profile
    • 1776 effects
Re: Req. mod and double delay board for Aquaboy
« Reply #1 on: July 31, 2011, 04:37:23 AM »
huh...that's strange it's not on FSB anymore...

EDIT: I forgot the boutique section is down temporarily.  I'm sure you could pm abfackeln and he'll get you the pdf's.

Here are some vero layouts that I've used before:

http://www.sabrotone.com/wp-content/uploads/2011/02/DoubleDelay.gif

http://www.sabrotone.com/wp-content/uploads/2011/02/Modulation.gif

Josh
« Last Edit: July 31, 2011, 06:33:28 AM by gtr2 »
1776 EFFECTS STORE     
Contract PCB designer

bigmufffuzzwizz

  • Electron Doctor
  • *****
  • Posts: 2624
  • Magic S.
    • View Profile
    • Magic Pedals
Re: Req. mod and double delay board for Aquaboy
« Reply #2 on: July 31, 2011, 10:15:30 AM »
Are those the layouts you used for the aquaboy that you were working so hard on getting really clean sounding repeats? I always meant to ask you but I haven't gotten to that build yet. I gotta read through your tech help thread again.  :)
Owner and operator of Magic Pedals

gtr2

  • Electron Doctor
  • *****
  • Posts: 4788
  • Josh
    • View Profile
    • 1776 effects
Re: Req. mod and double delay board for Aquaboy
« Reply #3 on: August 01, 2011, 04:52:59 AM »
I had the DD fabbed board for the one with the ridiculously long tech thread.  I used the DD vero for the mn3005 aquaboy build so the distorting repeats was a non issue.

Josh
1776 EFFECTS STORE     
Contract PCB designer