Author Topic: Bypass Level on Aions BlueShift  (Read 739 times)

BrianS

  • Electron Doctor
  • *****
  • Posts: 851
    • View Profile
Bypass Level on Aions BlueShift
« on: September 22, 2017, 09:23:05 AM »
Can someone who has built one of these tell me how loud your bypass signal is?   When I first put mine together I got no bypass at all but the effect worked.  After reviewing the updated build doc I had some wires in the wrong place and fixed that.  Now I have bypass but it's very faint.  I wired this for traditional bypass.  Almost everything I've build in the past month has a problem and it's really getting frustrating.  I'm sure this isn't how it's suppose to sound and as usual something is jacked.

EBK

  • Electron Doctor
  • *****
  • Posts: 1603
  • Eric K.
    • View Profile
Re: Bypass Level on Aions BlueShift
« Reply #1 on: September 22, 2017, 09:29:32 AM »
Mine will be traditional bypass as well when I finish wiring it.  Hopefully, I'll find enough time this weekend for that, and I'll report back.
Technical difficulties in abundance.  Please stand by.  ;-)

EBK

  • Electron Doctor
  • *****
  • Posts: 1603
  • Eric K.
    • View Profile
Re: Bypass Level on Aions BlueShift
« Reply #2 on: October 03, 2017, 05:50:36 AM »
Reporting back.
Bypass on mine is nearly the same level as the effect, only ever-so-slightly less. 

Did you remember to jumper pads D-E and G-H and ground pad B?
Technical difficulties in abundance.  Please stand by.  ;-)

BrianS

  • Electron Doctor
  • *****
  • Posts: 851
    • View Profile
Re: Bypass Level on Aions BlueShift
« Reply #3 on: October 03, 2017, 08:49:30 PM »
Yeah. I have a ground problem somewhere.  If I put my thumb over the bottom of the board around the opto device it comes up to unity.  I'm in the middle of restoring a 50 year old Delta Jointer so my focus has dropped off of pedals for the time being.  Thanks for answering back though.