News:

Forum may be experiencing issues.

Main Menu

Splattering edge of speaker exploding Hendrix sound.

Started by blearyeyes, January 18, 2018, 04:06:19 PM

Previous topic - Next topic

blearyeyes

Where should I start? I have a couple of fuzz face circuits but I'm chasing a particular sound.  That blooming gating splattered sound. Voltage starved? Particular trannies? Any input ?


Sent from my iPhone using Tapatalk

LaceSensor

check out the lovetone big cheese
Its basically a silicon fuzz face with op amp buffers and a big muff tone control, plus it has the cheese "broken speaker" setting

Netnnk

The Band of Gypsys fuzz (not really a Fuzz Face,  even if it's named as one).  I built this layout:
http://effectslayouts.blogspot.com/2017/08/dunlop-band-of-gypsys-fuzz-face.html


matmosphere

Quote from: Netnnk on January 18, 2018, 04:40:15 PM
The Band of Gypsys fuzz (not really a Fuzz Face,  even if it's named as one).  I built this layout:
http://effectslayouts.blogspot.com/2017/08/dunlop-band-of-gypsys-fuzz-face.html

I was gonna say Octavia. Bean's Retrograde is where I'd start.

lars

Earth Sound Research graphic fuzz circuit with a potentiometer connected between pins 1 and 5 on the 741 (I think 10k), for offset null control. You want to purposely cause a mismatch in this case. You can get some ridiculous gated fuzz that way.
Yep. I clicked the, "continue without supporting us" link....

blearyeyes

Quote from: Matmosphere on January 18, 2018, 05:39:29 PM
Quote from: Netnnk on January 18, 2018, 04:40:15 PM
The Band of Gypsys fuzz (not really a Fuzz Face,  even if it's named as one).  I built this layout:
http://effectslayouts.blogspot.com/2017/08/dunlop-band-of-gypsys-fuzz-face.html

I was gonna say Octavia. Bean's Retrograde is where I'd start.

Does it do splatter choking speaker blowing up stuff? I have a couple green ringers that do the octave pretty good. 🤔   

blearyeyes

Quote from: lars on January 18, 2018, 11:19:42 PM
Earth Sound Research graphic fuzz circuit with a potentiometer connected between pins 1 and 5 on the 741 (I think 10k), for offset null control. You want to purposely cause a mismatch in this case. You can get some ridiculous gated fuzz that way.

Cool, have to look at that one. I would think pushing the signal out of bounds would work.

Matt

Fuzz Factory or just take the gate control and add that to a standard fuzz face
Matt