Author Topic: BOSS CE1 PROJECT: MN3002 or TDA1022P: DOC UPLOADED  (Read 40267 times)

RonSound

  • Diode Destroyer
  • *
  • Posts: 4
    • View Profile
Re: BOSS CE1 PROJECT: MN3002 or TDA1022P: DOC UPLOADED
« Reply #180 on: December 09, 2020, 04:02:31 PM »
I just finished my build and it worked great right off the bat.  A little noisy with battery power but not any more than I'd expect.  I added the Chorus Depth control.  The only thing I would've liked would be some way of telling whether it's in Chorus or Vibrato mode, like a bi-color LED or something.
« Last Edit: December 09, 2020, 04:04:16 PM by RonSound »

RonSound

  • Diode Destroyer
  • *
  • Posts: 4
    • View Profile
Re: BOSS CE1 PROJECT: MN3002 or TDA1022P: DOC UPLOADED
« Reply #181 on: December 09, 2020, 05:43:49 PM »
I decided to try adding a bi-color LED to the circuit.  I used the unused center column on the chorus/vibrato footswitch to do the switching.  I ran a wire from the cathode pad to the center switch lug.  The common cathode of the LED goes to the other LED pad and each of the LED anodes to the top and bottom switch lugs  (top lug for chorus, bottom lug for vibrato).  I had to drop R64 down to 5k to make the LED a little brighter until I get some better bi-color ones.  It didn't seeem to affect the sound quality at all and now it glows green for chorus and red for vibrato.  Here's a quick diagram in case anyone else wants to try it.

gordo

  • Electron Doctor
  • *****
  • Posts: 2768
    • View Profile
    • Project Website
Re: BOSS CE1 PROJECT: MN3002 or TDA1022P: DOC UPLOADED
« Reply #182 on: December 09, 2020, 07:58:59 PM »
What a great looking build.  The demo video showed off the deep capabilities but I found I needed dramamine to handle it.  The original was not at all subtle but didn't veer off into queasy territory either.
Gordy Power
On lockdown outside of Chicago

DR_BEN

  • Diode Destroyer
  • *
  • Posts: 4
    • View Profile
Re: BOSS CE1 PROJECT: MN3002 or TDA1022P: DOC UPLOADED
« Reply #183 on: December 31, 2020, 11:44:26 AM »
Bingo!
I am honored to show you me newest project. It is a copy of iconic chorus BOSS CE-1. I spend months over this project,  of course I made lots of prototypes.
Here are differences between mine project and original:
👉power supply 9V or polarization BOSS
👉substitute hard to find analogue delay line MN3002 with newer electronic circuit
👉smaller box


Ricotjuh

  • Diode Destroyer
  • *
  • Posts: 41
    • View Profile
Re: BOSS CE1 PROJECT: MN3002 or TDA1022P: DOC UPLOADED
« Reply #184 on: December 31, 2020, 02:14:45 PM »
That looks good. Is this just the exact copy described earlier in the topic? Or does this differ from what has been discussed here?
Are you willing to share your experience and schematic? So that we can all learn something from it?

DR_BEN

  • Diode Destroyer
  • *
  • Posts: 4
    • View Profile
Re: BOSS CE1 PROJECT: MN3002 or TDA1022P: DOC UPLOADED
« Reply #185 on: January 23, 2021, 05:13:52 AM »
That looks good. Is this just the exact copy described earlier in the topic? Or does this differ from what has been discussed here?
Are you willing to share your experience and schematic? So that we can all learn something from it?

Thanks! Those are oryginal schematic with equivalent (TDA1022), and mod supply section.

Sound samples:
&t=2s