Author Topic: Mobius Strip (Patreon build)  (Read 874 times)


  • Transistor Tickler
  • **
  • Posts: 55
    • View Profile
Mobius Strip (Patreon build)
« on: April 03, 2018, 12:23:53 PM »
      Here's my Mobius Strip build from the Patreon, same as the one on the main page. I'll be using a 1590BB enclosure, so the pots and jacks are off board. 
      The build went smoothly, but I suggest box film caps for 82n and above.   You can get away with 1/4W resistors, but go for the 1/8W if you can, especially for the ones under the PT2399's.  Like the PDF advises, I had to use rows of in-line sockets, as a 16 pin socket won't fit. 


  • Electron Doctor
  • *****
  • Posts: 654
    • View Profile
Re: Mobius Strip (Patreon build)
« Reply #1 on: April 03, 2018, 01:03:01 PM »
You're posting this on purpose. I see what you did! 8)