Author Topic: 2 pedal pcb builds  (Read 2229 times)

m-Kresol

  • Electron Doctor
  • *****
  • Posts: 2880
  • Felix - Graz, Austria
    • View Profile
    • My blog - in german
2 pedal pcb builds
« on: July 30, 2019, 06:27:41 AM »
I've recently build two effects using pcbs from pedalpcb.com for a friend that is playing in the band "Cynic Circus". Not quite my cup of tea, but all of the guys are cool to talk to and super friendly.

First build is a Fortin 33 boost (basically a TC electronic Integrated Pre), the second a Airis Savage Drive. Went together well and I am happy with the results. The 33 has too much treble for his taste, so I'll install an internal trimmer to alter that.


     



     
I build pedals to hide my lousy playing.

My projects are labeled Quantum Effects. My shared OSH park projects: https://oshpark.com/profiles/m-Kresol
My build docs and tutorials

Aleph Null

  • Electron Doctor
  • *****
  • Posts: 712
  • Too obtuse to be square
    • View Profile
    • The Hard Problem
Re: 2 pedal pcb builds
« Reply #1 on: July 30, 2019, 02:51:07 PM »
Envirotex finish? Do you pour then drill or vice versa? Looks slick!

cooder

  • Electron Doctor
  • *****
  • Posts: 3214
  • Stephan Nelson / New Zealand / Aotearoa
    • View Profile
Re: 2 pedal pcb builds
« Reply #2 on: July 30, 2019, 04:44:06 PM »
Spiffin! 8)
BigNoise Amplification

m-Kresol

  • Electron Doctor
  • *****
  • Posts: 2880
  • Felix - Graz, Austria
    • View Profile
    • My blog - in german
Re: 2 pedal pcb builds
« Reply #3 on: July 31, 2019, 03:01:06 AM »
thank you

Envirotex finish? Do you pour then drill or vice versa? Looks slick!

yup, both are finished with envirotex as per Juansolo and Cleggy's tutorial. Drill the enclosure, paint and sand, tape the holes from the bottom, pour envirotex and drill out the holes again.

You can also find the procedure in my etching tutorial linked in my signature
« Last Edit: July 31, 2019, 03:30:23 AM by m-Kresol »
I build pedals to hide my lousy playing.

My projects are labeled Quantum Effects. My shared OSH park projects: https://oshpark.com/profiles/m-Kresol
My build docs and tutorials

Martan

  • Electron Doctor
  • *****
  • Posts: 550
  • Marty
    • View Profile
Re: 2 pedal pcb builds
« Reply #4 on: July 31, 2019, 05:36:07 AM »
Looks great! Nice wiring, too.