News:

Forum may be experiencing issues.

Main Menu

Harbinger 1.5 Bulb pulsating momentarily

Started by Axeman, November 11, 2019, 04:01:07 AM

Previous topic - Next topic

Axeman

So I finished My Harbinger 1.5 today when I powered it up 9V the bulb pulsated for about 3 seconds and the light remained steady.  so I disconnected the power and tried it again, and same thing pulsates then stops. ??????
Any help

Axeman

OK got it working Q11 and Q12 (MPSA13) replaced.  The way I figured it out was by shorting the ground on Q11.  Hope that helps someone else.