Author Topic: Klein Bottle crackle  (Read 462 times)


  • Diode Destroyer
  • *
  • Posts: 1
    • View Profile
Klein Bottle crackle
« on: December 31, 2019, 04:35:21 PM »
Hi all,

I've built a Klein Bottle and Channels 1&3 worked fine. Channel 2 didn't have the HPF working. After resoldering a joint, that worked. However, there's still a lot of noise and crackle and pop coming through the signal when engaged in Ch. 2.

Does anyone have suggestions? I've tried turning the pots back and forth a  lot, and it still makes noise even when not touching the pots. Any suggestions on trouble shooting the gremlin noises would be much appreciated.



  • Solder Ninja
  • ****
  • Posts: 323
    • View Profile
Re: Klein Bottle crackle
« Reply #1 on: January 03, 2020, 12:22:39 PM »
Send good pictures of the top and bottom of the board.