Author Topic: Collosalus Flanger: gone for good?  (Read 668 times)

Bucksears

  • Transistor Tickler
  • **
  • Posts: 78
    • View Profile
Collosalus Flanger: gone for good?
« on: April 20, 2020, 02:18:01 PM »
Is the Collosalus gone for good, or will it ever get revamped/redesigned/re-released?

Thx!
- Buck

madbean

  • Administrator
  • Electron Doctor
  • *****
  • Posts: 10137
  • Brian
    • View Profile
    • madbeanpedals
Re: Collosalus Flanger: gone for good?
« Reply #1 on: April 20, 2020, 07:08:49 PM »
There are no plans to do that at the moment. Not impossible, but I have 2 or 3 other flanger designs I am prototyping in addition to the stereo Current Lover so that is why it was discontinued.

Bucksears

  • Transistor Tickler
  • **
  • Posts: 78
    • View Profile
Re: Collosalus Flanger: gone for good?
« Reply #2 on: April 21, 2020, 06:27:18 AM »
Sounds good - thx man!

skeeter

  • Diode Destroyer
  • *
  • Posts: 37
    • View Profile
Re: Collosalus Flanger: gone for good?
« Reply #3 on: April 24, 2020, 01:11:52 AM »
I built an early version a few years ago but had all the problems others had ticking ,noise etc I found uk-electronics version 'much better he used a different voltage regulator  the only thing wrong with the two I built was the board is horizontal,uk-electronics also made a pop  free ,oscillation free version of the Plexiclone Boneyard great version currently building a BF-2 clone at the moment Brian hint hint, have a go again at the two above,LM2940CT-15 Low Drop Regulator15V/ 1A TO220