Author Topic: Transformer isolated A/B/Y layout  (Read 716 times)

Beedoola

  • Solder Ninja
  • ****
  • Posts: 309
    • View Profile
Transformer isolated A/B/Y layout
« on: July 01, 2020, 11:56:24 PM »
I just got the transformers for this but I'm not sure how to read the pins on the transformer from the schematic. Can anyone take a look at this?

http://www.geofex.com/FX_images/TransformerSplitter.pdf

TFZ

  • Transistor Tickler
  • **
  • Posts: 113
    • View Profile
Re: Transformer isolated A/B/Y layout
« Reply #1 on: July 02, 2020, 10:10:08 AM »
Using this: https://www.mouser.de/datasheet/2/449/XC-600134-1212477.pdf

Primary side (left) in the schematic: pin 1 is signal, pin 3 ground.
Secondary side: pin 4 to the jack tip, pin 6 to sleeve.

Beedoola

  • Solder Ninja
  • ****
  • Posts: 309
    • View Profile
Re: Transformer isolated A/B/Y layout
« Reply #2 on: July 02, 2020, 11:20:42 AM »
Thank you, TFZ!  :D