« previous next »
Pages: [1]

Author Topic: Power Adapter question  (Read 430 times)

Mr.H

  • Diode Destroyer
  • *
  • Posts: 18
    • View Profile
Power Adapter question
« on: July 21, 2020, 07:18:46 PM »
I'm trying to build the Smoothie 2020 phaser, and have ran into a problem.  The volume of the pedal is very faint, and there is no phasing effect.  In the build doc, under the voltages section there is a blurb "9.42v DC One Spot".  Does the pedal require this type of adapter?  If so, who has something available?  Thanks.
Logged

davent

  • Electron Doctor
  • *****
  • Posts: 2532
  • Hamilton ON
    • View Profile
Re: Power Adapter question
« Reply #1 on: July 21, 2020, 07:44:18 PM »
Quote from: Mr.H on July 21, 2020, 07:18:46 PM
I'm trying to build the Smoothie 2020 phaser, and have ran into a problem.  The volume of the pedal is very faint, and there is no phasing effect.  In the build doc, under the voltages section there is a blurb "9.42v DC One Spot".  Does the pedal require this type of adapter?  If so, who has something available?  Thanks.

I haven't looked at the doc but i'd think that 9.42v DC is what's pertinent as a reference.
dave
Logged
"If you always do what you always did- you always get what you always got." - Unknown

If my photos are missing again... they're hosted by photobucket... and as of 06/2017 being held hostage... to be continued?

madbean

  • Administrator
  • Electron Doctor
  • *****
  • Posts: 9762
  • Brian
    • View Profile
    • madbeanpedals
Re: Power Adapter question
« Reply #2 on: July 21, 2020, 07:57:55 PM »
It's only mentioned as a reference point. As long as you have a decent 9v supply that's what matters.

If you are getting faint output and no phasing then there is something else wrong in the build I suggest looking at the guidelines for getting help with specific builds:
https://www.madbeanpedals.com/forum/index.php?topic=902.0
https://www.madbeanpedals.com/forum/index.php?topic=26664.0
Logged
Pages: [1]
« previous next »