News:

Forum may be experiencing issues.

Main Menu

Power Adapter question

Started by Mr.H, July 22, 2020, 01:18:46 AM

Previous topic - Next topic

Mr.H

I'm trying to build the Smoothie 2020 phaser, and have ran into a problem.  The volume of the pedal is very faint, and there is no phasing effect.  In the build doc, under the voltages section there is a blurb "9.42v DC One Spot".  Does the pedal require this type of adapter?  If so, who has something available?  Thanks.

davent

Quote from: Mr.H on July 22, 2020, 01:18:46 AM
I'm trying to build the Smoothie 2020 phaser, and have ran into a problem.  The volume of the pedal is very faint, and there is no phasing effect.  In the build doc, under the voltages section there is a blurb "9.42v DC One Spot".  Does the pedal require this type of adapter?  If so, who has something available?  Thanks.

I haven't looked at the doc but i'd think that 9.42v DC is what's pertinent as a reference.
dave
"If you always do what you always did- you always get what you always got." - Unknown

If my photos are missing again... they're hosted by photobucket... and as of 06/2017 being held hostage... to be continued?

madbean

It's only mentioned as a reference point. As long as you have a decent 9v supply that's what matters.

If you are getting faint output and no phasing then there is something else wrong in the build I suggest looking at the guidelines for getting help with specific builds:
https://www.madbeanpedals.com/forum/index.php?topic=902.0
https://www.madbeanpedals.com/forum/index.php?topic=26664.0