Right now I'm using the Princeton but most of the time it's my 70s silver Champ. Perfect amp for testing pedals ( for me). The Champ has developed some tube rattle though. Need to fix that.
I remember building the peacekeeper or dangerzone and playing them with a marshall style and it didnt gel and then with my Allen Accomplice it was magic. I assumed you had used the fender as the pedal platform, glad i was right.
Bench amp is this crappy little solid state Harmony that I put an old Fender HRD 12" speaker in and it sounds REALLY nice and totally neutral so works well for testing and setting up pedals.
I just finished rebuilding a Traynor TS-25. I used to have one of these when they were new and have been looking for another one since. Not at all neutral but a cool amp and stupid loud for 25 watt SS. Hard to believe it's 40+ years old.
Live it's a Peavey 6505 mh 20 watt tube amp. Cleans on this thing are ridiculous and torturing the front end with a compressor and booster cuts a wide swath of tones.
I think most people who are pedal junkies like us are using a higher headroom cleanish tone as our base so that's a good place to start with whatever amp you use. Unless your showing a pedal that's made to use with a pushed amp like a treble booster or certain fuzzes then make sure that's a requirement. I wish that people showed the pedal used with different types of amps more instead of just one amp. Another thing is alot of people don't play at loud volumes anymore so I thi k it's important to show what it's like thru a real speaker at volume and a speaker sim. So many people are so focused on showing off their playing versus letting everyone know what the gear actually sounds like
You make a really good point here, I like playing a clean amp and using pedals to muck it up or hitting something dirty with fuzzes. I am going to try tomorrow to run my Mesa TA-30 into a Two Notes live and run out to a 1x12 that is mic'd up. That way there would be speaker sim and actually amp sounds, not sure how it is going to turn out and I am sure phasing will be a nightmare but that would be a great way to use multiple speakers that I don't actually have. Plus that amp is a million sounds in it which would be like trying a pedal through multiple amps.
Here is my success from today, moving the shelves and junk around to shove this 1x12 in there to set up the mics and sound panels in the closet. 50 watt plexi sounded very tame in there, so I am going to keep with using higher watt amps for now and look to acquiring a princeton and tweed deluxe.
Also a preview of the EOO3 that is long been on the to do list.
