News:

Forum may be experiencing issues.

Main Menu

Add LED to mudbunny tone dpdt?

Started by thesameage, June 15, 2021, 08:09:22 PM

Previous topic - Next topic

Zerro

#15
Look upstairs reply #5
"Nudíte se? Kupte si našeho cvičeného ježka! Pobaví vás svými veselýmí kousky!"

matmosphere


thesameage



thesameage

#19
This worked! You can see that the board has space for a PCB mounted dpdt switch. I just ran wires to a dpdt footswitch so that I can have easier access.




thesameage

I think I just need to put in a 3dpt switch and add a ground and LED connection. I was playing the pedal this weekend and it seems pretty important to know visually when the tone bypass is on.

jimilee

Are any of the pins grounded when it's bypassed and not when it isn't?


Sent from my iPhone using Tapatalk
Pedal building is like the opposite of sex.  All the fun stuff happens before you get in the box.

matmosphere

Don't think any of the pins are grounded. Swapping to a 3dpt is probably the best way to get it done.

thesameage

As far as I can tell, none of the pins are grounded. That would solve the issue right there.