Author Topic: Anyone built the Parasit Bitbreaker deluxe?  (Read 886 times)

3knobfury

  • Diode Destroyer
  • *
  • Posts: 28
    • View Profile
Anyone built the Parasit Bitbreaker deluxe?
« on: August 26, 2023, 01:13:21 PM »
Looking for a little help from someone who has successfully built one of these. Alternately, does anyone have a schematic perhaps?


3knobfury

  • Diode Destroyer
  • *
  • Posts: 28
    • View Profile
Re: Anyone built the Parasit Bitbreaker deluxe?
« Reply #2 on: August 26, 2023, 01:29:48 PM »
Ah, thanks so much. Have you built one/verified the Vero?

jwin615

  • Solder Ninja
  • ****
  • Posts: 341
    • View Profile
Re: Anyone built the Parasit Bitbreaker deluxe?
« Reply #3 on: August 26, 2023, 02:44:09 PM »
Have not. Are you having issues or just preemptive questions?
Pretty simple schematic. If you're having issues, post pics of both sides of your board and a detailed description.

3knobfury

  • Diode Destroyer
  • *
  • Posts: 28
    • View Profile
Re: Anyone built the Parasit Bitbreaker deluxe?
« Reply #4 on: August 27, 2023, 05:42:19 AM »
I do have a non working build at the moment. Just trying to do my due diligence before posting up a troubleshooting thread. First time for Vero, but have used protoboard before w/o issue. Also first time programming an MCU. Guess Iím less worried ab the circuit build itself and more worried that my upload process is wrong.
« Last Edit: August 27, 2023, 06:03:48 AM by 3knobfury »

mjg

  • Electron Doctor
  • *****
  • Posts: 1243
  • Matt
    • View Profile
    • My pedal blog
Re: Anyone built the Parasit Bitbreaker deluxe?
« Reply #5 on: August 27, 2023, 03:47:43 PM »
As some troubleshooting, maybe get a hex file that does something obvious, like flash a led on and off on one pin, and see if you can get that to work with the chip.  If you succeed at that, your upload process is good and should work with any hex. 

3knobfury

  • Diode Destroyer
  • *
  • Posts: 28
    • View Profile
Re: Anyone built the Parasit Bitbreaker deluxe?
« Reply #6 on: August 27, 2023, 06:53:21 PM »
Good suggestion. I will try that.