Author Topic: Saguaro Wah  (Read 556 times)

blackhatboojum

  • Solder Ninja
  • ****
  • Posts: 239
  • Clinton
    • View Profile
Saguaro Wah
« on: December 02, 2023, 08:07:19 PM »
Iíve already talked at great length about the mighty saguaro cactus before so, Iíll spare everyone that long winded story.  What I will talk about, is how this particular build came to be.  The truth isÖ Iím out of steam when it comes to this hobby.  Iíve built over 50 pedals and successfully built some of the most complicated circuits available in the diy effects community.  Having nothing left that I wanted to build or add to my collection, the only thing I could think of to push myself further was design and have a pcb made.  Thatís exactly what Iíve done with this build.  Not knowing a damn thing about this sort of thing, I decided to start small and chose a simple circuit that I would actually use to teach myself pcb design software.  A wah circuit is simple enough and because our fearless leader makes his EAGLE library available for download, that was the direction I went.  I gotta say, Iím pretty proud of myself for pulling off a working pcb having never messed with anything like this before.  I say that but also, all credit really goes to Brian.   I used his component library and essentially his Weener Wah layout in my pcb design.  Yes, there are some differences but, itís pretty obvious where I drew inspiration from.  I even messaged him about this project idea because I didnít feel right having the pcbs made without Brianís blessing.  Having received the go ahead, I had a handful of pcbs made and Iím quite pleased with the results.  Itís nothing special or groundbreaking but, hot damnÖ I did a thing.  As far as what the saguaro wah actually isÖ well, itís just a hybrid of vox and Dunlop branded wah circuits.  It has certain values of resistor and capacitors in certain places, that sound best to me for my amp and pedal board setup. 


« Last Edit: December 02, 2023, 11:06:41 PM by blackhatboojum »
The kind of guy who sticks a fork in his Dr. Pepper... If you know what I mean.

jessenator

  • Electron Doctor
  • *****
  • Posts: 826
  • (un)Professional Hobby Collector
    • View Profile
Re: Saguaro Wah
« Reply #1 on: December 02, 2023, 08:38:25 PM »
That is some splendid work, Clinton. Neat and clean layout and slick wiring. Nicely done!

It is super awesome that Bean shares the component libraries. Makes this kind of stuff a lot more friendly to work with.

jimilee

  • Global Moderator
  • Electron Doctor
  • *****
  • Posts: 11473
  • Jimi Lee
    • View Profile
Re: Saguaro Wah
« Reply #2 on: December 02, 2023, 08:40:09 PM »
Oh man, I love it, and it's so compact.
Pedal building is like the opposite of sex.  All the fun stuff happens before you get in the box.

blearyeyes

  • Electron Doctor
  • *****
  • Posts: 1786
    • View Profile
    • Musical Endeavors
Re: Saguaro Wah
« Reply #3 on: December 03, 2023, 02:17:02 AM »
Clean build. You took the leap and it worked!

Bret608

  • Electron Doctor
  • *****
  • Posts: 1946
    • View Profile
Re: Saguaro Wah
« Reply #4 on: December 04, 2023, 07:41:27 AM »
Yeah, I love this! Congrats! I still haven't taken the plunge on layouts other than vero.

I did manage to grab a used wah on Reverb and have started modding it to learn what's what until the Weener Wah is back in stock. It's a 1990 revision E without the input buffer. It's already got the 390r Q1 emitter resistor and the 33k in parallel with the inductor. I upped that to 47k to see if it would bring out a bit more vocal quality. It does sound good! I'd be curious what values you like where.

Bio77

  • Electron Doctor
  • *****
  • Posts: 1700
    • View Profile
Re: Saguaro Wah
« Reply #5 on: December 04, 2023, 09:23:32 AM »
That's super awesome!  Congrats.   8)

I've been itching to do a layout again.  I might recommend trying KiCad or another free software on your next one.  EAGLE is EOL and it will be a more of a bummer to switch the more skill you get with EAGLE.   

blackhatboojum

  • Solder Ninja
  • ****
  • Posts: 239
  • Clinton
    • View Profile
Re: Saguaro Wah
« Reply #6 on: December 04, 2023, 03:15:06 PM »
That is some splendid work, Clinton. Neat and clean layout and slick wiring. Nicely done!

It is super awesome that Bean shares the component libraries. Makes this kind of stuff a lot more friendly to work with.

Thanks.  Without the work Brian already put in, I probably wouldn't have been able to pull this off.

Oh man, I love it, and it's so compact.

Many thanks!

Clean build. You took the leap and it worked!

Thanks!  Honestly, I'm a little surprised it worked lol.

Yeah, I love this! Congrats! I still haven't taken the plunge on layouts other than vero.

I did manage to grab a used wah on Reverb and have started modding it to learn what's what until the Weener Wah is back in stock. It's a 1990 revision E without the input buffer. It's already got the 390r Q1 emitter resistor and the 33k in parallel with the inductor. I upped that to 47k to see if it would bring out a bit more vocal quality. It does sound good! I'd be curious what values you like where.

Thanks.  I attached my schematic so you can take a look at the values of everything.

That's super awesome!  Congrats.   8)

I've been itching to do a layout again.  I might recommend trying KiCad or another free software on your next one.  EAGLE is EOL and it will be a more of a bummer to switch the more skill you get with EAGLE.   

Thanks John!  I'm actually playing around with Diptrace as well. 
The kind of guy who sticks a fork in his Dr. Pepper... If you know what I mean.

Bret608

  • Electron Doctor
  • *****
  • Posts: 1946
    • View Profile
Re: Saguaro Wah
« Reply #7 on: December 05, 2023, 08:05:06 AM »
Thanks for sharing your schematic! That gives me some ideas for what to try next.

Mich P

  • Solder Ninja
  • ****
  • Posts: 293
    • View Profile
Re: Saguaro Wah
« Reply #8 on: December 05, 2023, 11:05:19 AM »
Clean.

Thewintersoldier

  • Electron Doctor
  • *****
  • Posts: 1578
  • Chris
    • View Profile
Re: Saguaro Wah
« Reply #9 on: December 06, 2023, 12:16:51 PM »
great Job Clinton!
Who the hell is Bucky?