News:

Forum may be experiencing issues.

Main Menu

BIG MUFF HAM'S HEAD (Madbean Mudbunny)

Started by andregarcia57, June 13, 2012, 03:23:58 PM

Previous topic - Next topic

andregarcia57

hello how are you?
I am studying various ham's head!
which was exactly the model that David Gilmour used on The Wall album?
HAM'S HEAD V1 or V2?

I'm riding on Madbean Mudbunny Big Muff (TM) changes is correct?


R1     2M2        C1    100n      D1 ­ D4       1n914
R2     33K        C2    470p       D5            1N4001
R3     100K       C3    100n      Transistors
R4     470K       C4    150n       Q1            2N5133
R5     100R       C5    470p      Pots
R6     12K        C6    100n      SUST       100kB
R7     820         C7    100n       TONE       100kB
R8     7k5        C8    470p       VOL          100kA
R9     100K       C9    100n       MID           jumper
R10   470K             C10   4n
R11   100R        C11   10n
R12   12K          C12   100n
R13   7k5          C13   100n
R14   100K        C14   100uF
R15   470K        C15   100n
R16   100R
R17   12K
R18   33K
R19   33K
R20   390K
R21   100K
R22   12K
R23   3k3
R24   100R

mgwhit

I doubt anyone other than Pete Cornish knows what component values are really in Dave Gilmour's Big Muffs.  Here's the most information I've ever seen on the subject.  I'm sure there's scads of speculation elsewhere on the Internet.

andregarcia57

Quote from: mgwhit on June 13, 2012, 05:36:03 PM
I doubt anyone other than Pete Cornish knows what component values are really in Dave Gilmour's Big Muffs.  Here's the most information I've ever seen on the subject.  I'm sure there's scads of speculation elsewhere on the Internet.

ok, more modification I did to correct? HAM'S HEAD in  (Madbean Mudbunny)

R1     2M2        C1    100n      D1 ­ D4       1n914
R2     33K        C2    470p       D5            1N4001
R3     100K       C3    100n      Transistors
R4     470K       C4    150n       Q1            2N5133
R5     100R       C5    470p      Pots
R6     12K        C6    100n      SUST       100kB
R7     820         C7    100n       TONE       100kB
R8     7k5        C8    470p       VOL          100kA
R9     100K       C9    100n       MID           jumper
R10   470K       C10   4n
R11   100R        C11   10n
R12   12K          C12   100n
R13   7k5          C13   100n
R14   100K        C14   100uF
R15   470K        C15   100n
R16   100R
R17   12K
R18   33K
R19   33K
R20   390K
R21   100K
R22   12K
R23   3k3
R24   100R

crash

Honestly, fretting (no pun intended) over a couple of component values is not going to make a big difference.  What you posted above for the Ram's head will be good enough.  There are so many other factors that go into the Gilmour sound.  I would suggest putting a Colorsound Overdrive after the Ram's head.  Set it up at slight overdrive.  That is what I do.  It sound so much better that way.

Another thing to do is socket C5, C6, C8, C9.  Try lowering and raising these values slightly.  For instance for C5 and C8 try between 330p and 560p and for C6 and C9 try between 47n and 220n.  You may find some values that fit your gear better.

andregarcia57

Quote from: crash on June 13, 2012, 11:37:46 PM
Honestly, fretting (no pun intended) over a couple of component values is not going to make a big difference.  What you posted above for the Ram's head will be good enough.  There are so many other factors that go into the Gilmour sound.  I would suggest putting a Colorsound Overdrive after the Ram's head.  Set it up at slight overdrive.  That is what I do.  It sound so much better that way.

Another thing to do is socket C5, C6, C8, C9.  Try lowering and raising these values slightly.  For instance for C5 and C8 try between 330p and 560p and for C6 and C9 try between 47n and 220n.  You may find some values that fit your gear better.


yes yes I know to own equipment and hand (feeling) of each influence on everything, I really like to use TS808 after BIG Muff Fuzz face  , I think for my sound is very good.

Most just want to make a clone of RAM'S HEAD.
I appreciate the attention

jimijam

Quote from: andregarcia57 on June 13, 2012, 03:23:58 PM
hello how are you?
I am studying various ham's head!


mmmmmmmmmmmmmmmmmmmmmm...Ham :P
tried lifting weights once....they were too heavy!

gtr2

1776 EFFECTS STORE     
Contract PCB designer