News:

Forum may be experiencing issues.

Main Menu

2012 chunk

Started by toolguy, August 07, 2012, 07:13:59 PM

Previous topic - Next topic

toolguy




This thing can rip your face off!
Will post sound clips soon.

stecykmi

that's a badass finish, mechanically etched somehow?

culturejam

Quote from: stecykmi on August 07, 2012, 07:57:32 PM
that's a badass finish, mechanically etched somehow?

Maybe a "metal" sticker? I've seen stuff like that at the auto parts store.
Partner and Product Developer at Function f(x).
My Personal Site with Effects Projects

jimmybjj

Looks like "engine turning"
Pcbs no longer available

toolguy

#4
Quote from: culturejam on August 07, 2012, 08:02:03 PM
Quote from: stecykmi on August 07, 2012, 07:57:32 PM
that's a badass finish, mechanically etched somehow?

Maybe a "metal" sticker? I've seen stuff like that at the auto parts store.

;)
Polished case with a engine turned vinyl decal. Cleared over with non yellowing clear coat.

snz728


nzCdog


njkke

Ultra Metal Finish! I Like it!  ;)

toolguy


mgwhit

Great demo!  So many Dr Boogey demos on YouTube sound like ass, but yours really nails it.

Apologies if you've already addressed this in another thread, but you seem to have added a Bright switch since the original photos.  Would you mind explaining what you've done there?  Thanks!

toolguy

Thanks man. 8)
It's c15 on a dpdt with a .0082uf (bright) on one end....and
a .047 uf on the other.
For whatever reason...my pedal was very tinny with the stock 6.8n on c15.
This mod totally opened it up .
Going to work on the bass next (it's pretty much maxed out all the time).

mgwhit

Thanks! Mine is too tinny and lacks bass with single coils, so I'm going to have to check that out.

chip46

Is this with the J201's?

Sounds/looks great man  :)

toolguy

Thanks.
5457 in q3 and q5.
It was the only way I could get her to tame down.
With all j201's it was like a 5150 with a sho boost in front of it....but it was too noisy (lot's of idle crack and hiss).
With a TIGHT gate it would make a cool death metal pedal that way...but was unstable
for my needs.

Still lots of gain on tap though. :)

I plan on building a full 5457 version with needed bass mods to bring back the low end when using all 5457's. I tried it and think it would make an excellent "rock" pedal with those "tubes  ;)" in it.