News:

Forum may be experiencing issues.

Main Menu

"pop" switch 3pdt on EGODRIVER

Started by hnkyrocks, November 04, 2010, 01:30:12 AM

Previous topic - Next topic

hnkyrocks

i was build a EGODRIVER but my switch 3pdt is "POP" when i turn on...can somebody help me to give a solution for this problem....for reduce or eliminate this problem....?

thanks...
HNKYROCKS from Indonesia

k.rock!

Are you using a pull-down resistor? R1 on the schematic...usually that's why you would want to have a resistor there, to help with that...
God bless!
www.kalebromero.com

hnkyrocks

HNKYROCKS from Indonesia

k.rock!

Yeah that should be fine. A couple things that I would do to try to fix this is checking for any solder globs, cold solder joints or even increasing the 1M resistor to a larger value (See post by Pearly Gator on this page: http://www.thegearpage.net/board/archive/index.php/t-252527.html)

There's a few other suggestions in there you might want to try out. Good luck!
God bless!
www.kalebromero.com

hnkyrocks

HNKYROCKS from Indonesia