Author Topic: ZPM and buffered Apis  (Read 2888 times)

njkke

  • Stompbox Star
  • ***
  • Posts: 223
    • View Profile
Re: ZPM and buffered Apis
« Reply #15 on: April 08, 2013, 01:00:29 PM »
You know what? I started building 1590A after seeing your beautiful works...
You're my 1590A guru!  ;)

juansolo

  • Electron Doctor
  • *****
  • Posts: 4687
  • John - Wakefield, UK
    • View Profile
    • Juan's Gnomepage
Re: ZPM and buffered Apis
« Reply #16 on: April 14, 2013, 12:28:07 PM »
Cured it completely by doing as suggested above. A very thin piece of ali between the board and the jacks connected to ground (and covered in insulation tape so as not to short on the bottom of the PCB). No clock noise at all now.
Gnomepage - DIY effects library & stuff in the Stompage bit
“I excite very large doom for days” - playpunk