News:

Forum may be experiencing issues.

Main Menu

what tubes bugera v55(non-pedal)

Started by garfo, April 28, 2013, 07:36:28 AM

Previous topic - Next topic

Aentons

Quote from: Zerro on September 26, 2021, 04:37:28 PM
BTW, can anybody from USA tell me WTF is that "mojo"?
It's a special voodoo magic luck charm

Zerro

Thanx, now I can finally die without feeling of guilty...
"Nudíte se? Kupte si našeho cvičeného ježka! Pobaví vás svými veselýmí kousky!"

thesmokingman

Quote from: redkurn on September 26, 2021, 12:07:23 PM
How did it turn out? I have the v55hd infinium.
I've been looking into changing v1 to a 5751 or 12at7 as suggested above.

Did you change any other tubes from 12ax7 and are you using 6L6 or find a alternative?
I'd give two configurations a try: 2 12AY7 into a balanced 12AX7 PI and keep the 6L6s OR 3 x 12AX7 into 5881s (rebiased, of course)  ... if it were a head instead of combo I'd probably opt for the long plate 12AX7s and the 5881s
once upon a time I was Tornado Alley FX

redkurn

Quote from: thesmokingman on September 28, 2021, 11:53:19 AM
I'd give two configurations a try: 2 12AY7 into a balanced 12AX7 PI and keep the 6L6s OR 3 x 12AX7 into 5881s (rebiased, of course)  ... if it were a head instead of combo I'd probably opt for the long plate 12AX7s and the 5881s

Mine is just a head, V55HD.
The Infinium is supposed to automatically bias the tubes, would I need to do any mods to make the 5881 tubes to work in place of the 6L6?
As far as I know only the power tubes are biased automatically, the only two that have an LED on the back of the amp.

thesmokingman

once upon a time I was Tornado Alley FX