Like the title says, it's just a power brick so I can use the 16vAV outlet on my AC10 now that I've taken the HT-Dual off.
Feed it whatever over 12v, and it rectifies down to 3x 9vDC and 1x 12vDC, and it also has a pass through at the other end for the source power. I ripped the circuit out of my previous S.L.O.P.P.Y, replacing one of the 9v regs with a 12. There are footswitch washers on the jacks because I had a bad day on the drill press with the step bit.
Quote from: Willybomb on February 24, 2020, 12:42:28 PM
There are footswitch washers on the jacks because I had a bad day on the drill press with the step bit.
Rotate all the jacks so the googly eyes are looking in the same direction and I'll allow it. ;)
I always love a simple utility box. Guaranteed useful.
I'm a little confused on the color though. Is it black or is it yellow?
Cool idea, looks handy
QuoteI'm a little confused on the color though. Is it black or is it yellow?
It's a yellow tayda powdercoat I got secondhand (along with another 5 or 6) that I cut back a little with wet/dry paper and coated with etching primer and upol clear. I've left the baseplate as is - yellow.
Another yellow/black brick in the wall. Nice and useful it'll be.
I never updated this post with the sticker, keeping the yellow/black theme going...