IMP 2022 Build

[Ny_racer_xxx]

 Got it built, seems to work as it should, the 1 O'clock on the volume and gain seem to be the sweet spot, but getting lots of noise with anymore than that, a little even at those settings.
 Is that normal with that board?  I soldered the diodes in, I think I'm going to pull them and put transistor jacks in to try a couple of different ones, so I'll double check everything, just wondering if that's the way they are.

[madbean]

What kind of noise, white noise, motorboating etc? If you are also dialing up the tone control at the same time it's possible you might have a little bit of noise but it shouldn't be overwhelming or anything.