Author Topic: Icon Series #6 - Auryn - Double looper  (Read 685 times)

Willybomb

  • Electron Doctor
  • *****
  • Posts: 1564
  • Willy, not really a bomb.
    • View Profile
    • RockStarGuitar
Icon Series #6 - Auryn - Double looper
« on: July 06, 2017, 06:30:30 AM »
Nothing much to see here, just a 125b with two switchable loops in series.  Etching primer, waterproof sticker, a couple of layers of rustoleum motospray acrylic lacquer.  I use mammoth's enclosure templates for laying out my graphics, which is pretty handy for making sure everything is inside the top.

Both LEDs have a 1k in line, makes the blue one rather bright even though it's not a waterclear.  Works as advertised, a 1meg pulldown on the switches or a couple of buffers might be handy but don't seem to be necessary so far.

nzCdog

  • Electron Doctor
  • *****
  • Posts: 3895
  • Corey - Christchurch, NZ
    • View Profile
    • Soundcloud
Re: Icon Series #6 - Auryn - Double looper
« Reply #1 on: July 06, 2017, 09:25:08 PM »
That graphic is awesome... did you print a sticker or what?  Looks great

Willybomb

  • Electron Doctor
  • *****
  • Posts: 1564
  • Willy, not really a bomb.
    • View Profile
    • RockStarGuitar
Re: Icon Series #6 - Auryn - Double looper
« Reply #2 on: July 07, 2017, 05:02:44 AM »
Yeah, it's some sort of waterproof sticker paper that they have at the printshop. Works well, only needs a coat or two of clear to finish it off.  You don't want too much clear as it will yellow the whites.  Had to redo the Phat Boy as a result.