News:

Forum may be experiencing issues.

Main Menu

Zero Point Micro build docs / PDF?

Started by mathias, June 01, 2020, 04:23:20 PM

Previous topic - Next topic

mathias

Hello,

First of all, my apologies if this is not the right forum to post this. I didn't want to add questions to the errata post for the Zero Point Micro PCB, and I couldn't find any other threads about the build docs.

I see the Zero Point build docs on the Archives page, but I was hoping that the Zero Point Micro had its own docs. I have 2 of these PCBs and want to build them up.


Thanks in advance!

madbean

All the docs are actually in the Zero Point archive file.

electronarchy

bump

Hi, I am looking for this too, a year later, and I can't find the archive file. Anyone have a link?
Trying to patch up an old ZP Micro I found lying around.

electronarchy

found this: https://web.archive.org/web/20181022070747/http://madbeanpedals.com:80/projects/ARCHIVE/Delay/

but link is ded :[

madbean

There's an archive section. Under the delay part you'll find a zip that has all the Zero Point documentation:

https://www.madbeanpedals.com/projects/archives/index.html
Direct link: https://www.madbeanpedals.com/projects/archives/Delay/ZeroPoint.zip

electronarchy

Quote from: madbean on December 06, 2021, 08:25:07 PM
all the Zero Point documentation

thank you kindly sir bean! funny I have been brought back around here.... i built a couple of your pedals back in 2010.

now i'm patching up a dual pedal that has a hipster fuzz into a ZP Micro. my friend wants me to make it possible to get a full wet signal from the delay for extra spacey sounds. after looking at the schematic i think i'll try this: snip out r3, short r13 to c18 to bypass the mix pot, and then use the mix pot as a voltage divider between the fuzz and delay outputs