Author Topic: Multiwave Mega  (Read 2536 times)

mbaseman

  • Diode Destroyer
  • *
  • Posts: 6
    • View Profile
Multiwave Mega
« on: July 19, 2022, 06:38:48 AM »
I'm a beginner who needs help. I just completed the Multiwave Mega kit and it's DOA.  The leds light but no sound.

matmosphere

  • Electron Doctor
  • *****
  • Posts: 2942
  • Matthew
    • View Profile
Re: Multiwave Mega
« Reply #1 on: July 19, 2022, 08:45:18 AM »
We are gonna need more than just that to help you. Take a quick look over this thread, it lays out what is most helpful to post along with tech help request

https://www.madbeanpedals.com/forum/index.php?topic=902.0

At the minimum we need clear pictures of both sides of the board and all of the hookups.

mbaseman

  • Diode Destroyer
  • *
  • Posts: 6
    • View Profile
Re: Multiwave Mega
« Reply #2 on: July 20, 2022, 06:37:43 AM »
Here are some photos. Hope I can get some help.

matmosphere

  • Electron Doctor
  • *****
  • Posts: 2942
  • Matthew
    • View Profile
Re: Multiwave Mega
« Reply #3 on: July 20, 2022, 09:21:17 AM »
Check the connections on that little stomp board to start. It looks like the output jack might not be connected.

matmosphere

  • Electron Doctor
  • *****
  • Posts: 2942
  • Matthew
    • View Profile
Re: Multiwave Mega
« Reply #4 on: July 20, 2022, 02:00:25 PM »
You should move this to the tech help thread in the Parasit studios sub forums btw.

And does any sound come through in bypass?

mbaseman

  • Diode Destroyer
  • *
  • Posts: 6
    • View Profile
Re: Multiwave Mega
« Reply #5 on: July 22, 2022, 08:00:07 AM »
I got it to work, but it produces a loud hum. How do I get rid of this?

matmosphere

  • Electron Doctor
  • *****
  • Posts: 2942
  • Matthew
    • View Profile
Re: Multiwave Mega
« Reply #6 on: July 22, 2022, 12:33:59 PM »
A good place to start is making sure everything is properly grounded. You might reflow the solder on all the ground connections.