Author Topic: Misfit questions  (Read 308 times)

Lgmlgm76

  • Diode Destroyer
  • *
  • Posts: 9
    • View Profile
Misfit questions
« on: December 07, 2022, 07:01:46 PM »
I noticed on the Projects(DIY) page the Misfit is listed as a 1590B build, but on the PDF instructions there is only a 125B drill template. Could I use either enclosure?

Also, it says the CA3260E has a 16v supply limit. Will this sound fine with a 9v supply or should I opt for higher?

Thanks!

mauman

  • Solder Ninja
  • ****
  • Posts: 293
  • Mike
    • View Profile
Re: Misfit questions
« Reply #1 on: December 07, 2022, 07:10:14 PM »
It's a 125B, the 1590B is a typo.

Ibanez designed the circuit for 9V, I've tried it at 12V and it doesn't sound any better, so I'd stick with 9V.

Lgmlgm76

  • Diode Destroyer
  • *
  • Posts: 9
    • View Profile
Re: Misfit questions
« Reply #2 on: December 07, 2022, 07:22:43 PM »
It's a 125B, the 1590B is a typo.

Ibanez designed the circuit for 9V, I've tried it at 12V and it doesn't sound any better, so I'd stick with 9V.

Thank you kindly!