Vox wah vero

[CurlyMo]

Hello,

Finished wiring up my Multiplex with Mod board and found that I get only one echo repeat across the entire sweep of the repeat knob until it goes instantly into full modulation at the very end of the range.

I do get a different delay sound between each mode (delay 1 and 2 on RE201 and Binson mode, just the one delay on Echoplex), pretty sure I'm getting the full delay time sweep on both delay knobs, mix control works, and the modulation works fine.

IC1
4.12
4.13
4.11
0
4.10
4.13
4.12
8.26

IC2
5.09
2.54
0
0
3.04
2.54
.19
.68
2.54
2.54
2.54
2.54
2.54
2.54
2.55
2.55

IC3
5.09
2.54
0
0
2.94
2.54
.23
.70
2.55
2.55
2.55
2.55
2.55
2.54
2.54
2.55

Tried running through all the solder points but nothing is sticking out to my untrained eye. Is there a specific are on the board where I need to be concentrating my efforts?

Having an issue getting pics to post, will figure out and get them posted ASAP...

Thank you

Sent from my SM-G960U using Tapatalk

[CurlyMo]

Hello,

Finished wiring up my Multiplex with Mod board and found that I get only one echo repeat across the entire sweep of the repeat knob until it goes instantly into full modulation at the very end of the range.

I do get a different delay sound between each mode (delay 1 and 2 on RE201 and Binson mode, just the one delay on Echoplex), pretty sure I'm getting the full delay time sweep on both delay knobs, mix control works, and the modulation works fine.

IC1
4.12
4.13
4.11
0
4.10
4.13
4.12
8.26

IC2
5.09
2.54
0
0
3.04
2.54
.19
.68
2.54
2.54
2.54
2.54
2.54
2.54
2.55
2.55

IC3
5.09
2.54
0
0
2.94
2.54
.23
.70
2.55
2.55
2.55
2.55
2.55
2.54
2.54
2.55

Tried running through all the solder points but nothing is sticking out to my untrained eye. Is there a specific are on the board where I need to be concentrating my efforts?

Having an issue getting pics to post, will figure out and get them posted ASAP...

Thank you

Sent from my SM-G960U using Tapatalk

[CurlyMo]

Hello,

Finished wiring up my Multiplex with Mod board and found that I get only one echo repeat across the entire sweep of the repeat knob until it goes instantly into full modulation at the very end of the range.

I do get a different delay sound between each mode (delay 1 and 2 on RE201 and Binson mode, just the one delay on Echoplex), pretty sure I'm getting the full delay time sweep on both delay knobs, mix control works, and the modulation works fine.

IC1
4.12
4.13
4.11
0
4.10
4.13
4.12
8.26

IC2
5.09
2.54
0
0
3.04
2.54
.19
.68
2.54
2.54
2.54
2.54
2.54
2.54
2.55
2.55

IC3
5.09
2.54
0
0
2.94
2.54
.23
.70
2.55
2.55
2.55
2.55
2.55
2.54
2.54
2.55

Tried running through all the solder points but nothing is sticking out to my untrained eye. Is there a specific are on the board where I need to be concentrating my efforts?

Sent from my SM-G960U using Tapatalk

[CurlyMo]

Hello,

Finished wiring up my Multiplex with Mod board and found that I get only one echo repeat across the entire sweep of the repeat knob until it goes instantly into full modulation at the very end of the range.

I do get a different delay sound between each mode (delay 1 and 2 on RE201 and Binson mode, just the one delay on Echoplex), pretty sure I'm getting the full delay time sweep on both delay knobs, mix control works, and the modulation works fine.

IC1
4.12
4.13
4.11
0
4.10
4.13
4.12
8.26

IC2
5.09
2.54
0
0
3.04
2.54
.19
.68
2.54
2.54
2.54
2.54
2.54
2.54
2.55
2.55

IC3
5.09
2.54
0
0
2.94
2.54
.23
.70
2.55
2.55
2.55
2.55
2.55
2.54
2.54
2.55

Tried running through all the solder points but nothing is sticking out to my untrained eye. Is there a specific are on the board where I need to be concentrating my efforts?

Sent from my SM-G960U using Tapatalk

[brejna]

Hi everyone, it is been a while since I post anything.. I am working on the new amp based on popular 3 channel brown eye. First channel is plexi, second brown eye and the third boosted brown eye. At the moment I am waiting for few components to arrive. Progress will be documented through topic..

Cheers
Brane

[brejna]

Hi everyone, it is been a while since I post anything.. I am working on the new amp based on popular 3 channel brown eye. First channel is plexi, second brown eye and the third boosted brown eye. At the moment I am waiting for few components to arrive. Progress will be documented through topic..

Cheers
Brane

[brejna]

Hi everyone, it is been a while since I post anything.. I am working on the new amp based on popular 3 channel brown eye. First channel is plexi, second brown eye and the third boosted brown eye. At the moment I am waiting for few components to arrive. Progress will be documented through topic..

Cheers
Brane

[brejna]

Hi everyone, it is been a while since I post anything.. I am working on the new amp based on popular 3 channel brown eye. First channel is plexi, second brown eye and the third boosted brown eye. At the moment I am waiting for few components to arrive. Progress will be documented through topic..

Cheers

Brane

[chongmagic]

Is there any issue to sub these with 15k?

Sent from my SM-N975U using Tapatalk

[aballen]

Been a while since I've built a pedal.  My wife has a secret santa thing at work and the person she picked is a younger kidsl and a death metal band, so....

She said hey, gotta do this on the cheap, but I know you have a stockpile of parts and it's been a while since you built anything.  How about it?

So he is getting a boss-hm2.

Thing is mammoth is gone and PPP seems  to only accept orders in quantitys of 25+. Where are you guys getting painted enclosures these days?  Specifically I'm looking for a 125B black hammertone or black vein finish. Any good sources left?

Sent from my ONEPLUS A6013 using Tapatalk

[aballen]

Been a while since I've built a pedal.  My wife has a secret santa thing at work and the person she picked is a younger kidsl and a death metal band, so....

She said hey, gotta do this on the cheap, but I know you have a stockpile of parts and it's been a while since you built anything.  How about it?

So he is getting a boss-hm2.

Thing is mammoth is gone and PPP seems  to only accept orders in quantitys of 25+. Where are you guys getting painted enclosures these days?  Specifically I'm looking for a 125B black hammertone or black vein finish. Any good sources left?

Sent from my ONEPLUS A6013 using Tapatalk

[aballen]

Been a while since I've built a pedal.  My wife has a secret santa thing at work and the person she picked is a younger kidsl and a death metal band, so....

She said hey, gotta do this on the cheap, but I know you have a stockpile of parts and it's been a while since you built anything.  How about it?

So he is getting a boss-hm2.

Thing is mammoth is gone and PPP seems  to only accept orders in quantitys of 25+. Where are you guys getting painted enclosures these days?  Specifically I'm looking for a 125B black hammertone or black vein finish. Any good sources left?

Sent from my ONEPLUS A6013 using Tapatalk

[aballen]

Been a while since I've built a pedal.  My wife has a secret santa thing at work and the person she picked is a younger kidsl and a death metal band, so....

She said hey, gotta do this on the cheap, but I know you have a stockpile of parts and it's been a while since you built anything.  How about it?

So he is getting a boss-hm2.

Thing is mammoth is gone and PPP seems  to only accept orders in quantitys of 25+. Where are you guys getting painted enclosures these days?  Specifically I'm looking for a 125B black hammertone or black vein finish. Any good sources left?

Sent from my ONEPLUS A6013 using Tapatalk

[aballen]

Been a while since I've built a pedal.  My wife has a secret santa thing at work and the person she picked is a younger kidsl and a death metal band, so....

She said hey, gotta do this on the cheap, but I know you have a stockpile of parts and it's been a while since you built anything.  How about it?

So he is getting a boss-hm2.

Thing is mammoth is gone and PPP seems  to only accept orders in quantitys of 25+. Where are you guys getting painted enclosures these days?  Specifically I'm looking for a 125B black hammertone or black vein finish. Any good sources left?

Sent from my ONEPLUS A6013 using Tapatalk

[aballen]

Been a while since I've built a pedal.  My wife has a secret santa thing at work and the person she picked is a younger kidsl and a death metal band, so....

She said hey, gotta do this on the cheap, but I know you have a stockpile of parts and it's been a while since you built anything.  How about it?

So he is getting a boss-hm2.

Thing is mammoth is gone and PPP seems  to only accept orders in quantitys of 25+. Where are you guys getting painted enclosures these days?  Specifically I'm looking for a 125B black hammertone or black vein finish. Any good sources left?

Sent from my ONEPLUS A6013 using Tapatalk