Author Topic: My Zero Point Delay etching mask! :)  (Read 2478 times)

neiloler

  • Solder Ninja
  • ****
  • Posts: 249
    • View Profile
My Zero Point Delay etching mask! :)
« on: January 29, 2013, 12:55:43 AM »
I'm not sure where to put this up, but I wanted to share. :)

I spent most of the afternoon getting my etching mask ready for my build of the MadBean Zero Point SDX. I'm going to build it in a 2" high BB-size box so I can space those stomp switches out a bit from the original project documents.

I'll have to get a digital delay with nice tap tempo (this one isn't really a good candidate for the Taptation option...maybe in the future...), but this is looking to be a big, fun project. I figured it would be a worthwhile project to make a nice, original box for. :)

Anyone want to donate $40 so I can order the box and the rest of the stuff I need? ;)
OLERAudio - Sole proprietor, engineer, and goofball

jkokura

  • Global Moderator
  • Electron Doctor
  • *****
  • Posts: 7526
  • Jacob - SK, Canada
    • View Profile
    • JMK PCBs
Re: My Zero Point Delay etching mask! :)
« Reply #1 on: January 29, 2013, 07:16:06 AM »
I think you have your switch labeled backwards. I think it's Deep as the top setting and analog as the lower setting...

Jacob
JMK Pedals - Custom Pedal Creations
JMK PCBs *New Website*
pedal company - youtube - facebook - Used Pedals

Haberdasher

  • Electron Doctor
  • *****
  • Posts: 2844
  • "El Duder-ino"
    • View Profile
Re: My Zero Point Delay etching mask! :)
« Reply #2 on: January 29, 2013, 07:26:24 AM »
haha, i dig the little ghost at the top
Looking for a discontinued madbean board?  Check out my THREAD

FABRICATED PCB's FOR SALE:

neiloler

  • Solder Ninja
  • ****
  • Posts: 249
    • View Profile
Re: My Zero Point Delay etching mask! :)
« Reply #3 on: January 29, 2013, 09:34:13 AM »
Thanks for catching that Jacob, I guessed at it and figured I'd confirm before etching, but I had a hard time without having the switch right there in front of me.

It's the ghost from my old band sticker. Our name was Ghost in a Jar. :)
OLERAudio - Sole proprietor, engineer, and goofball

madbean

  • Administrator
  • Electron Doctor
  • *****
  • Posts: 9432
  • Brian
    • View Profile
    • madbeanpedals
Re: My Zero Point Delay etching mask! :)
« Reply #4 on: January 29, 2013, 09:46:00 AM »
Yeah that ghost is da bomb.
I own madbeanpedals (duh). I am part owner of Function F(X).

raulduke

  • Electron Doctor
  • *****
  • Posts: 2103
    • View Profile
    • SJ Effects
Re: My Zero Point Delay etching mask! :)
« Reply #5 on: January 29, 2013, 10:33:07 AM »
Yep that lil'ghost is real cool.

Really like the graphics dude.

Looking forward to seeing the finished build.


lincolnic

  • Electron Doctor
  • *****
  • Posts: 2277
    • View Profile
Re: My Zero Point Delay etching mask! :)
« Reply #6 on: January 29, 2013, 10:32:03 PM »
Also want to chime in with some love for that ghost.

neiloler

  • Solder Ninja
  • ****
  • Posts: 249
    • View Profile
Re: My Zero Point Delay etching mask! :)
« Reply #7 on: January 31, 2013, 01:35:06 AM »
Thanks all! Here's the original ghost graphic (sticker for our band):

OLERAudio - Sole proprietor, engineer, and goofball

Hangingmonkey

  • Electron Doctor
  • *****
  • Posts: 548
  • I only started doing this to make a cheap TS808
    • View Profile
Re: My Zero Point Delay etching mask! :)
« Reply #8 on: February 17, 2013, 05:18:05 AM »
I think you have your switch labeled backwards. I think it's Deep as the top setting and analog as the lower setting...

Jacob

Why is the switch labelled backwards?  The order of the delay modes are the same as on Brians etched plate on his build report

(Checking as my decal is ready to clearcoat today so thought Id better double check)
« Last Edit: February 17, 2013, 05:20:00 AM by Hangingmonkey »

neiloler

  • Solder Ninja
  • ****
  • Posts: 249
    • View Profile
Re: My Zero Point Delay etching mask! :)
« Reply #9 on: February 17, 2013, 04:10:50 PM »
I'd always follow Brian's over mine. I've just not fixed mine yet (or posted the fixed one I should say).
OLERAudio - Sole proprietor, engineer, and goofball

fish22

  • Stompbox Star
  • ***
  • Posts: 133
    • View Profile
Re: My Zero Point Delay etching mask! :)
« Reply #10 on: February 18, 2013, 11:45:49 AM »
I never would have spotted the little ghost!

Not to derail this, but the Zero Point has a shimmer? Is it the typical 'shimmer' effect like the Blue Sky/M9?
Hi, my name is Wyatt.