Pic of Ego Driver wiring footswitch to newest board?

[rydog2223]

Hello.  First Madbean build and things are going smooth.  Hey I am on one hangup.  I have the newest version of the board and I am a bit confused to some of the lug wiring to the PCB.  1A lug in question and a couple of others.  Can someone show a completed pic of their build showing the wiring.  Sorry if this has been discussed.  I did a quick search and could not find any.  A lot of the pics were for the old board.  Thanks so much in advance!

[madbean]

For footswitch wiring, the standard diagram is what I use: http://www.madbeanpedals.com/tutorials/downloads/StandardWiring_MBP.pdf

Let me know if you need any more help.

[rydog2223]

For footswitch wiring, the standard diagram is what I use: http://www.madbeanpedals.com/tutorials/downloads/StandardWiring_MBP.pdf

Let me know if you need any more help.

Thanks so much for the reply!  I will go over this and see where I went wrong.  The LED came on but does not go off...  Thanks again and I will report back one way or the other.

[rydog2223]

Also... If not using the 2nd clipping mod.  Do you leave the holes on the PCB open or do you have to jumper them?  Thanks!

[rydog2223]

Got it! Thanks so much:)